Sharp MS702 - MiniDisc Recorder Operation Manual page 15

6
When a sound, such as a person
speaking, is picked up
microphone, recording will begin auto-
matically.
If a silence lasts for 3 seconds or more,
the recording will be paused automat-
ically. However, the unit will not pause
for about the first 10 seconds after
recording has started.
To interrupt a synchro recording:
06
Press the button while recording.
The Mic synchro recording mode will
be canceled, and the unit will enter the
recording stand-by mode.
To resume synchro recording, press
the ENTER/F.PLAY/SYNCHRO button
again.
To stop recording:
Press the /:OFF button.
Notes:
If you want to use a microphone, be sure it is a plug-in power type microphone that
can be powered by the main unit.
Insert the plug firmly. Otherwise, the recording will not be made properly.
Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.
When a recording is made using a stereo microphone (optionally available), an analog
recording will be made.
While making a mic recording, do not connect anything to the LINE IN jack on the
main unit.
Recording from the microphone
by the
(Mic manual recording)
You can start recording manually (any
time you like).
1
Put the unit in the recording stand-by
mode. (Perform steps 1 - 4 in the "Mic
synchro recording" section.)
06
2
Press the button.
Recording will start.
To interrupt a recording:
06
Press the button while recording.
The unit will enter the recording stand-
by mode.
To resume recording, press the
button again.
The track number will be increased by
one each time you interrupt a record-
ing.
To stop recording:
Press the /:OFF button.
14
06
MD-MS702