Functions - Sharp MS702 - MiniDisc Recorder Operation Manual

CONVENIENT PLAYBACK FUNCTIONS
APSS
(Auto Program Search System)
APSS automatically locates the beginning
of any track.
To move to the beginning of the
next track:
4
Press the button during playback.
To re-start the track being played:
5
Press the button during playback.
To skip a number of tracks at one time, 5 4
press the or button repeatedly
until the desired track number is shown.
To begin playback at a desired track, press 5 4
the or button while in the stop
mode to select the track number. Then 06
press the button.
Note:
When the first track is selected and the 5
button is pressed, the last track on
the disc will be located. When the last 4
track is selected and the
pressed, the first track will be located.
Cue and review
1
Load a MiniDisc and begin playback.
2
Press and hold down the
audible fast forward, or press and hold 5
down the
reverse.
3
Normal playback will resume when the 5 4
or button is released.
Notes:
When the end of the last track is
reached during fast forward, the unit
will enter the pause mode. When the
beginning of the first track is reached
during fast reverse, the unit will enter
the playback mode.
When the unit is in the all track repeat
mode, the search will wrap around from
the last track to the first, or vice versa.
Depending on the contents recorded
on a MiniDisc, some sounds may be
skipped while cueing and reviewing.
To search very quickly:
When fast forward or fast reverse is used
while in the pause mode, the search will
be performed more quickly than during
audible fast forward or fast reverse
playback.
In this mode, no sound is heard. There-
fore, you should refer to the time dis-
play.
When you lift your finger, the unit will
re-enter the pause mode.
button is
23
4
button for
button for audible fast
MD-MS702