Advertisement

Quick Links

FEE73407ZM
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FEE73407ZM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AEG FEE73407ZM

  • Page 1 FEE73407ZM User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
  • Page 5 ENGLISH • Do not pull the mains cable to • Do not remove the dishes from the disconnect the appliance. Always pull appliance until the programme is the mains plug. complete. Some detergent may • This appliance is fitted with a 13 A remain on the dishes.
  • Page 6: Product Description

    2.6 Disposal • Cut off the mains cable and discard it. • Remove the door catch to prevent WARNING! children and pets to get closed in the Risk of injury or suffocation. appliance. • Disconnect the appliance from the mains supply.
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates. Rinse aid indicator.
  • Page 8: Programmes

    5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Type of Degree of Programme phases Options load soil • Crockery • Normal • Prewash • ExtraPower • Cutlery •...
  • Page 9 ENGLISH Programme Type of Degree of Programme phases Options load soil • Crockery • Normal soil • Prewash and cut‐ • Wash 58 °C lery • Intermediate rinse • Final rinse 60 °C • • AirDry 1) This programme offers the most efficient use of water and energy consumption for crockery and cut‐ lery with normal soil.
  • Page 10: Options

    In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance. 6. OPTIONS in the wash temperature of the selected Desired options must be programme and reduces it to 45 °C.
  • Page 11 ENGLISH As the appliance stores the saved To enter user mode, press and hold settings, there is no need to configure simultaneously Delay and Option until it before every cycle. the indicators flash and the display is blank. How to set the programme selection mode 7.2 The water softener The appliance is in programme selection...
  • Page 12 For the correct water softener operation, Each performed softener rinse (possible the resin of the softener device needs to more than one in the same cycle) may be regenerated regularly. This process is prolong the programme duration by automatic and is the part of the normal another 5 minutes when it occurs at any dishwasher operation.
  • Page 13: Before First Use

    ENGLISH drying performance, always use rinse aid The duration of the drying phase and the and keep the rinse aid indicator active. door opening time vary depending on the selected programme and options. To deactivate the rinse aid dispenser and indicator, set the level of rinse aid to 0.
  • Page 14: Daily Use

    6. Turn the cap of the salt container procedure is complete. The procedure is clockwise to close the salt container. repeated periodically. CAUTION! 8.1 The salt container Water and salt can come out...
  • Page 15 ENGLISH 5. Set and start a programme suitable automatically the appliance when it is not for the type of load and the degree of operating. soil. The function comes into operation: 9.1 Using the detergent • When the programme is complete. •...
  • Page 16: Hints And Tips

    Press simultaneously Delay and Option If the door is opened for until the appliance is in programme more than 30 seconds selection mode. during the drying phase, the running programme ends. It Cancelling the programme does not happen if the door is opened by AirDry function.
  • Page 17 ENGLISH 10.2 Using salt, rinse aid and 4. When the programme is complete, adjust the water softener according detergent to the water hardness in your area. 5. Adjust the released quantity of rinse • Only use salt, rinse aid and detergent aid.
  • Page 18: Care And Cleaning

    10.6 Unloading the baskets After the programme is completed, water can still 1. Let the tableware cool down before remain on the inside you remove it from the appliance. Hot surfaces of the appliance. items can be easily damaged.
  • Page 19 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes.
  • Page 20 11.3 Cleaning the upper spray arms We recommend to clean the upper spray arms regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. The upper spray arms are placed under the upper basket. The spray arms (B) are installed in the duct (A) with the mounting elements (C).
  • Page 21: Troubleshooting

    ENGLISH 11.5 Removal of foreign 1. Disassemble the filters system as instructed in this chapter. objects 2. Remove any foreign objects manually. Check the filters and the sump after each 3. Reassemble the filters as instructed use of the dishwasher. Foreign objects in this chapter.
  • Page 22 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clogged. The display shows i20.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution Small leak from the appli‐ • The appliance is not levelled. Loosen or tighten the ad‐ ance door. justable feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
  • Page 24 Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appli‐ ance. Activate the function AirDry to set the automatic opening of the door and to improve the drying perform‐ ance.
  • Page 25: Technical Information

    ENGLISH Problem Possible cause and solution Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. bleware, on the tub and on the • The cap of the salt container is loose. inside of the door. •...
  • Page 26: Environmental Concerns

    It is possible to find information related to For more detailed information about the the performance of the product in the EU energy label, visit EPREL database using the link https:// www.theenergylabel.eu. eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance.
  • Page 28 www.aeg.com/shop...

Table of Contents