Page 2
It includes a day/night sensor to easily identify between day and night, and it is easy to install. Detection is possible through doors, panes of glass or thin walls. The MS362 is IP44 and can be used outdoor. Specifications:...
Page 3
Installation: Shut the power off. Loosen the screw on the bottom lid and open the wiring hole, pass the wire of power and load through the bottom lid. Replace the bottom lid with inflated screws as shown in figure 1. Connect the power and load wire into the connection-wire column according to the connecting figure.
Page 4
Note: Must be installed by a suitably qualified installer. Disconnect power source before installation. Shield any adjacent live components. Ensure device cannot be switched on. Ensure the power supply is disconnected during installation. Solutions to potential problems: The load does not work: a.
Need help?
Do you have a question about the MS362 and is the answer not in the manual?
Questions and answers