Download Print this page

Olympus T1000 - Pearlcorder Microcassette Transcriber Instruction Manual page 4

Transcriber

Advertisement

EN rrusrRucloNs
Thank you for choosing the Olympus Pearlcorder.
Please read these instructions carefully and check
the package label to confirm that all standard accesso-
i"' bEScRtPTtoN oF coNTRoLs
oPOWER Burton,/LED
REW Button
LISTEN Button
Fast Forward Button
ERASE Button,/LED
STOP Button
TEL REC Button (DTl000 only)
SPEED Control Knob
E Control I(nob
VOruME Control Knob
Hand Controller Rack
Built-in Speaker
Microcassette Companment
A PIpTATION (DT1000 onty)
9ee!:r:ryii
'€
..*
ries are included.
Standard accessories include AC adaptor.
:1X
i':il1
*i
@repn
sPEED Switch
@Hand Controller (DTl000 only)
@HEADSET Jack
@fap. Counter
@FOOT SWHAND MIC Jack (DT1000 only)
@rEl
REC Jack (DTl000 only)
@Dc 9v Jack
@Ac adaptor
@FF Button
@Dictation Control Selector
lD rcvsToP/LI STEN/REWI
@Monitor Speaker
@ ReOZCreen LED Indicator
@ ruitt-in Microphone
@ Headset
@ Foot Switch
1. Pnrpamtion
\
:it
:r:';i
l. Plug the AC adaptor @ into an AC outlet, and con-
nect the AC adaptor cord to the DC 9V jack of the
main unit @.
2. Insert the plug for the Hand Controller @ into the
HAND MIC jack at the rear of the main unit @.
3. Press the POWER button @ to turn the unit ON.
4. Press the EJECT button @ to open the Microcassette
compartment @. Insert a Microcassette by sliding it
into the holder with the open side of the cassette
Please Note:
a) Press the POWER button O to turn the unit OFF,
when the main unit is not in use.
b) Attach the Hand Controller Rack @ to either the right
or left side of the unit whichever is most convenient
facing out. Gently press the cassette compartrnent do\iln
until it locks.
5. Dictation functions can be implemented with the Hand
Controller @. The Hand Controller takes priority over
the buttons and switches on the main unit (except the
POWER and TEL REC buttons). Should you wish
to use the bunons on the main unit only, move the
Dictation Control Selector @ to the .STOP' position,
or disconnect the Hand Controller.
to you. Ib place the rack on the left side of the unit.
insert it into the holes and slide it toward you. To place
the rack on the right sidg insert it into the holes and
slide it away from you.
@
@

Advertisement

loading