D-Link DSL-524T User Manual page 13

Information you will need about your DSL-524T ADSL Router:
Username
Password
LAN IP address
for the DSL-524T
LAN Subnet Mask
for the DSL-524T
Information you will need about your LAN or computer:
Ethernet NIC
DHCP Client
status
It is recommended that your collect and record this information here, or in some other secure place, in
case you have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-524T ADSL
Router.
DSL-524T ADSL Router Manual
This is the Username you will be prompted
to enter when you access the DSL-524T's
configuration screens using a Web browser.
The default Username is admin.
This is the Password you will be prompted to
enter when you access the DSL-524T's
configuration screens using a Web browser.
The default Password is admin.
This is the IP address you will enter into the
Address field of your Web browser to
access the DSL-524T's configuration
screens using a Web Browser. The default
IP address is 192.168.1.1.
This is the subnet mask used by the DSL-
524T, and will be used throughout your LAN.
The default subnet mask is 255.255.255.0.
If your computer has an Ethernet NIC, you
can connect the DSL-524T to this Ethernet
port using an Ethernet cable. You can also
use the Ethernet port on the DSL-524T to
connect to other Ethernet devices, such as a
Wireless Access Point.
Your DSL-524T ADSL Router is configured,
by default, to be a DHCP server. This means
that it can assign an IP address, subnet
mask, and a default gateway address to
computers on your LAN. The range of IP
addresses the DSL-524T will assign are from
192.168.1.2 to 192.168.1.254. Your
computer (or computers) needs to be
configured to Obtain an IP address
automatically (that is, they need to be
configured as DHCP clients.)
13
Record your info
here.
Record your info
here.