SAFETY General safety instructions Remember, the Pure 121 air purifier unit is an electrical appliance. Please read these safety instructions carefully before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The Pure 121 warranty applies only if the unit is used according to these instructions.
SAFETY • Do not place any objects on top of the unit, block air outlets or intakes,or allow foreign objects to enter the unit as this may cause an electric shock or damage the unit. Intended Use CAUTIONS: • Supervise children to ensure that they do not play with the appliance.
Page 5
SYSTEM OVERVIEW Blueprint Air outlet Ion chamber (Air stream optimizer) Inner wall Motor Fan base Protective grill Release button for filter External metal frame (optional fabric pre-filter) Particle filter or Particle + Carbon filter Air inlet 360°...
Page 6
WHAT'S IN THE BOX Air purifier unit package Optional fabric pre- The air purifier unit Particle or Particle + filter: Carbon filter A fabric pre-filter captures larger particles and increases the lifetime of the main filter. Options A Particle filter or Particle + Carbon filter. A fabric pre-filter Choice of color for the fabric pre-filter.
USAGE Placement Place the unit in an upright position on the floor in your room. Be sure to place the unit where it won’t be knocked over by any person or pet in the household. Using the unit in your bedroom?: After 7 seconds the light automatically dims to 10% of the full effect.
SET UP Getting started If the optional pre-filter is used refer to steps 1 to 5. Otherwise refer to steps 5 and 6. Gently press the Remove the top Then attach the fabric buttons on both portion pre-filter. To ensure sides of the unit of the unit.
Page 9
ON/OFF AND OPERATING SPEEDS On/off and speed control On/Low Medium High Press once to turn Press twice to set to Press three times to the unit on and set it medium speed. set to high speed. to the recommended energy-efficient speed.
FILTERS Button control functions Change filter Change filter Reset the filter alert indicator When the indicator Press the button for When the indicator light turns red (after three seconds to turns yellow (after 5 1 extra month of reset the filter alert. months of operation), operation), you it’s time to order a...
Page 11
FILTERS Vacuum or wash the pre-filter Occasionally vacuum the exterior of the fabric pre-filter to remove dust. Before removing the fabric pre-filter, turn off and unplug the unit. Gently pull and Wash the pre- Before re- Lift off the top detach the filter on a gentle, placing the...
Page 12
FILTERS Change the main filter When the indicator light turns red, it’s time to change the main filter. Before changing the main filter, turn off and unplug the unit. Gently press the Lift off the top of the Remove the old main release buttons on unit.
CARE AND MAINTENANCE General care Take good care of your unit to ensure that it delivers optimal performance. Vacuum the pre-filter occasionally to remove dust, or wash it on a gentle, low temperature cycle in the washing machine. Change the main filter every six months, depending on the operating conditions.
Need help?
Do you have a question about the Blue PURE 121 and is the answer not in the manual?
Questions and answers