Page 1
Models Owner/Operator Manual 995301 – Self-Propelled Ръководство за работа на ползвателя/оператора (SN 000101 +) 995303 – Push Návod k obsluze (SN 000101 +) Betriebsanleitung Manual del propietario/operador Käyttöohjekirja Manuel du propriétaire/utilisateur Tulajdonosi/kezelői útmutató Manuale del proprietario/operatore Gebruikshandleiding Brukerhåndbok Instrukcja obslugi / operatora Manualul proprietarului / operatorului Руководство...
Page 2
ARIENS COMPANY certifica che: Wij, de ondergetekenden, ARIENS COMPANY, verklaren dat: Undertegnede, ARIENS COMPANY, bekrefter at: My, niżej podpisani, ARIENS COMPANY, oświadczamy, że: Nós, abaixo assinados, certificamos em nome da ARIENS COMPANY, que: Мы (фирма ARIENS), нижеподписавшиеся, настоящим заявляем, что: My, spoločnosť ARIENS COMPANY vyhlasujeme, že: Undertecknad, ARIENS COMPANY, intygar att: Biz altta imzası...
Page 3
(správce technické dokumentace) / Director Product Päivämäärä – Date – Conformance & Warranty (Archivar der technischen Data – Datum – Dato – Ariens Company Akte) / Direktør for produktoverholdelse & garanti Data – Data – дата – Brillion, WI 54110-1072 USA (indehaver af teknisk fil)/ Director de conformidad de Dátum –...
PRODUCT REGISTRATION that shipped with the unit. Refer to this The Ariens Dealer should register the product manual for engine service recommendations. at the time of purchase. Registering helps If the engine manual is unavailable, contact Ariens process warranty claims or contact the engine manufacturer for a replacement.
Page 5
4. Review recommended maintenance and adjustments. 5. Review Limited Warranty policy. 6. Complete a product registration card and return it to Ariens Company or register the product at www.ariens.eu. DISCLAIMER Ariens reserves the right to discontinue, change and improve its products at any time without notice or obligation to the purchaser.
SAFETY 2. Warning WARNING: This machine is capable of crushing or amputating body WARNING: Indicates a parts. It is capable of throwing POTENTIALLY HAZARDOUS objects. Failure to observe the safety SITUATION! If not avoided, COULD instructions in the manuals and on RESULT in death or serious injury.
Page 7
Safety Decal Identification Keep hands and feet away from all rotating or moving parts. Shut off engine and read manual before servicing or making adjustments to unit. NEVER direct discharge toward people, pets or property. Thrown objects can cause injury or damage.
Page 8
Keep in mind that the operator or user is Fuel responsible for accidents or hazards Warning: Fuel is highly flammable. Take the occurring to other people, their property and following precautions: themselves. • Store fuel in containers specifically Always disconnect spark plug before designed for this purpose.
Page 9
Do not mix oil with gasoline. Exercise extreme caution when operating on or crossing gravel drives, walks or roads. Do not overfill. Allow about 12 mm of tank Stay alert for hidden hazards or traffic. Do space for fuel expansion. not carry passengers.
Page 10
Turn off engine when installing or removing Before installing or removing collection bag, block-off plate. shut off engine and allow all moving parts to completely stop. Do not overload the machine by attempting to chip or shred any material beyond Empty collection bag after each use.
Page 11
Never secure from rods or linkages that could be damaged. Do not transport machine while engine is running. Accessories Use only Ariens Company-recommended attachments that are appropriate to your use and can be used safely in your application. EN - 11...
ASSEMBLY CAUTION: AVOID INJURY. Read and understand the entire SAFETY section before proceeding. CARTON CONTENTS See Figure 4. Figure 5 2. Hook bottom of collection bag under unit frame and move bag handle forward and upward to attach collection bag. See 1.
OPERATION CONTROLS AND FEATURES WARNING: AVOID INJURY. Read and understand the entire SAFETY section before proceeding. See Figure 6 for all controls and features locations. Drive Control Bar / Handlebar Adjustment Bar (Item 1) Model 995301: Hold the drive control bar against the handlebar to engage traction.
Page 15
Handlebar Adjustment Bracket Interlock Switch (Item 11) (Item 13) To adjust handlebar position, push down on The interlock switch engages when the handlebar adjustment bar (Item 1), move collection bag is attached, allowing the unit to handlebar to desired position and release start and continue running.
Page 16
ENGINE OIL Stop Engine IMPORTANT: Make sure engine is level 1. Release drive control bar. when checking oil. 2. Move throttle control lever to STOP. To check oil level: 3. Remove hearing protection and listen for 1. Turn engine off and let cool for at least all moving parts to completely stop.
Page 17
5. Remove belt from transmission sheave. 6. Rotate transmission toward engine. 7. Remove screws from engine mounting plate and lift engine from unit. Retain hardware. IMPORTANT: DO NOT remove impeller assembly from engine. 1. Spring Figure 11 4. Set the drive control tension at the point when the spring first begins to lengthen by tightening or loosening the nuts on the drive control cable.
Check bag for wear or deterioration. Replace worn or damaged bag with Ariens original replacement bag only. IMPORTANT: If necessary, use a pressure washer to clean bag. Allow bag to completely dry before use.
Follow the recommended mix ratio found on the fuel stabilizer container. To treat the fuel system for storage: 1. Add fuel stabilizer (Ariens part number 00592900) according to manufacturer’s instructions. 2. Run engine for at least 10 minutes after adding stabilizer to allow it to reach the carburetor.
TROUBLESHOOTING Problem Probable Cause Correction Fuel tank empty. Fill fuel tank with fuel. See Fuel Tank on page 15. Throttle is in STOP Move throttle control lever to desired position. position. Use FAST to start a warm engine; use FULL CHOKE to start a cold engine.
SERVICE PARTS ACCESSORIES See your authorized Ariens dealer for See your authorized Ariens dealer to add genuine OEM service parts. these optional accessories to your unit. Part No. Description Part No. Description 00592900 Fuel Stabilizer (4 oz) 79529400 Hose Kit...
® ® Sno-Thro , Sno-Tek Chore Performing Equipment Limited Warranty Ariens Company (Ariens) warrants to the original purchaser that Ariens, Gravely, Parker, and Countax ® ® brand chore performing equipment (including Sno-Thro and Sno-Tek equipment) purchased on or after 1/1/2013 will be free from defects in material and workmanship for the time period noted in the chart below.
Page 23
Register the product immediately at the time of sale. If the dealer does not register the product, the customer must complete the product registration card in the literature package and return it to Ariens Company, or register the unit online at www.ariens.com, www.gravely.com, www.countax.com or www.parkersweeper.com.
Page 24
Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely, Parker or Countax service parts are not covered by this warranty and may void the warranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this warranty.
Page 26
Ariens 655 West Ryan Street Brillion, WI 54110 920-756-4688 Fax 920-756-2407 www.ariens.com www.ariens.eu www.ariens.com.au...
Need help?
Do you have a question about the APV 995301 and is the answer not in the manual?
Questions and answers