Gree Sapphire GWH09AVDXE-D6DNA1A Owner's Manual
Gree Sapphire GWH09AVDXE-D6DNA1A Owner's Manual

Gree Sapphire GWH09AVDXE-D6DNA1A Owner's Manual

Hide thumbs Also See for Sapphire GWH09AVDXE-D6DNA1A:

Advertisement

Quick Links

Change for life
Owner's Manual
Original Instructions
Split Air Conditioner
CONTENTS
..................................................................................................
Thank you for choosing our product.
Please read this Owner's Manual carefully before operation and
retain it for future reference.
If you have lost the Owner's Manual, please contact the local agent
or visit www.gree.com or send an email to global@cn.gree.com for
the electronic version.
NOTE:
Actual product may be different from graphics,
please refer to actual products.
......................................................................................
...............................................................................
.............................................................
........................................................................................ .
..............................................................................
.......................................................................................
...................................................................................... .
............................................
01
07
08
15
16
17
19
22
24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sapphire GWH09AVDXE-D6DNA1A and is the answer not in the manual?

Questions and answers

Summary of Contents for Gree Sapphire GWH09AVDXE-D6DNA1A

  • Page 1: Table Of Contents

    Please read this Owner’s Manual carefully before operation and retain it for future reference. If you have lost the Owner's Manual, please contact the local agent or visit www.gree.com or send an email to global@cn.gree.com for the electronic version. NOTE:...
  • Page 2 Models Outdoor Unit Indoor Unit SAP09HP230V1R32AH SAP09HP230V1R32AO GWH09AVDXE-D6DNA1A SAP12HP230V1R32AH SAP12HP230V1R32AO GWH12AVDXE-D6DNA1A GWH18AVEXF-D6DNA1A SAP18HP230V1R32AH SAP18HP230V1R32AO SAP24HP230V1R32AH SAP24HP230V1R32AO GWH24AVEXH-D6DNA1A...
  • Page 3 Explanation of Symbols WARNING This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage to CAUTION property. Indicates important but not hazard-related information, used NOTICE to indicate risk of property damage. Exception Clauses Manufacturer will bear no responsibilities when personal injury or property loss is caused by the following reasons.
  • Page 4 The refrigerant process or to clean,other than those recomm- Refrigerant Before install the ended by the manufacturer. Safety Group appliance, read Servicing shall be performed only as recomm- the installation ended by the manufacturer. Appliance filled with manual first. Should repair be necessary,contact your nearest flammable magas R32.
  • Page 5 Safety operation of flammable refrigerant Welding table a - Minimum room area ( m If you should cut or weld the refrigerant system Based on UL 60335-2-40 requirements pipes in the process of maintaining, please foll- The following installation height and area for ow the steps as below: customer reference a.
  • Page 6 Safety operation of flammable refrigerant – Mechanical connectors used indoors shall comply with ISO 14903. When mechanical connectors are reused indoors, sealing parts shall be renewed. When flared joints are reused indoors, the flare part shall be refabri- cated. – Refrigerant tubing shall be protected or enclosed to avoid damage.
  • Page 7 FCC WARNING WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC STATEMENT This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
  • Page 8 IC STATEMENT This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
  • Page 9: Safety Precautions

    Safety precautions WARNING Installation should comply with nation- Installation or maintenance al electric safety regula- must be performed by qua- lified professionals. tions. Air Conditioner should be The appliance shall be in- properly grounded. Inco- stalled in accordance with rrect grounding may cause national wiring regulations.
  • Page 10 Safety precautions CAUTION Installation Instructions for installation line. and use of this product are The yellow-green wire in provided by the manufac- air conditioner is ground- turer. ing wire, which can't be us- Select a location which is ed for other purposes. ut of reach for children The air conditioner is the and far away from animals...
  • Page 11 Safety precautions WARNING Before operation, please If abnormal condition confirm whether power occurs (e. g. burned smell), specification complies please disconnect power with that on nameplate. at once and then contact Before cleaning or main- local dealer. taining the air condi- When nobody is taking tioner, please turn off air care of the unit, please...
  • Page 12 Safety precautions WARNING on the nameplate for the air conditioner without detailed specification. supervision. Keep children from play- The appliance shall be ing or climbing on the installed in accordance air conditioner. with national wiring reg- Do not put or hang drip- ulations.
  • Page 13 Safety precautions WARNING Operation and Maintenance ket. Otherwise, it may cau- se fire hazard. This appliance can be used Do disconnect power supp- by children aged from 8 ly when cleaning air condi- years and above and per- t ioner. Otherwise, it may sons with reduced physi- cause electric shock.
  • Page 14 Safety precautions CAUTION Operation and Maintenance When below phenomenon Do not spill water on the re- occurs, please turn off air mote controller, otherwise conditioner and disconnect the remote controller may power immediately, and be broken. then contact the dealer or Do not use fire or hair dry- qualified professionals for er to dry the filter to avoid...
  • Page 15: Parts Name

    Parts name Indoor Unit panel air inlet filter air outlet air guide louver Display Heat mode Cool mode Dry mode Temp. indicator Power indicator Humidity indicator NOTE ● This is the general introduction and the color of indicator is only for reference. Please refer to the actual display. ●...
  • Page 16: Operation And Introduction Of Remote Controller

    Operation and introduction of remote controller Introduction for icons on display Buttons on remote controller screen Quiet Set fan speed Turbo mode Send signal Auto mode Cool mode Dry mode Fan mode Heat mode X-FAN function Humidity control Power limiting operation Set temperature Indoor ambient temp.
  • Page 17 Introduction for buttons on ● When selecting heat mode, the air conditioner remote controller operates under heat mode. Press " + " or " - " button to adjust set temperature. Press "Fan" NOTE button to adjust fan speed. Press " "...
  • Page 18 ● Under cooling, press this button to set comfort- + / - button able air mode 1 " " and comfortable air mode 2 " ". The recommended applicable scenes of Press " + " or " - " button once increase or decrease comfortable air modes are as follows: set temperature 1℃(℉).
  • Page 19 midification with cooling mode. ● Under swing left and right mode, when the status is The humidity for smart dehumidification is auto- ● switched from off to , if press this button again matically adjusted according to human body 2s later, status will switch to off status directly;...
  • Page 20 Function introduction for duation sleep setting status, at this time, the t ime of remote controller will display "1HOUR", the set- combination buttons ting temperature "88" will display the correspond- ing temperature of last setting sleep curve and blink Energy-saving function (The first entering will display according to the initial curve setting value of original factory);...
  • Page 21 time, the dual-8 nixie tube will flash about 30s press "Mode" and "Sleep" buttons simultaneously when the unit is turned on each time to remind the till the icon in remote controller is not displayed. user to clean the filter; you can turn off this cycle ●...
  • Page 22 button on remote controller. Auto clean function NOTE Under unit off status, hold "Mode" and " " ● This function is only available for some models. buttons simultaneously for 5s to turn on or turn off the auto clean function. When the auto clean func- tion is turned on, indoor unit displays "CL"...
  • Page 23: Clean And Maintenance

    Clean and maintenance WARNING ■ The filter should be cleaned every three months . If there is much dust in the operation environme- WARNING nt, clean frequency can be increased. ■ Turn off the air conditioner and disconnect the ■ After removing the filter, do not touch fins to power before cleaning the air conditioner to av- avoid injury.
  • Page 24: Checked Items Before Maintenance

    Checked items before maintenance Phenomenon Solution Check items General phenomenon analysis Please check below items before asking for Whether there’s od- Eliminate the odour Odours are our source, such as maintenance. If the malfunction still can’t be source. Clean the furniture and cigare- emitted eliminated, please contact local dealer or qualified...
  • Page 25: Installation Notice

    Installation notice WARNING sure that the unit is running in cooling mode. Then, fully close the valve at high pressure side (liquid valve). About 30-40 seconds later, fully close the valve at low pressure side (gas valve), immediately stop the unit and disconnect power.
  • Page 26 Selection of installation location Requirements for electric connection Basic requirement 7.If the supply cord is damaged, it must be repla- Installing the unit in the following places may cau- ced by the manufacturer, its service agent or se malfunction. If it is unavoidable, please consu- similarly qualified persons in order to avoid a lt the local dealer: hazard .
  • Page 27: Installation Of Indoor Unit

    Installation of indoor unit NOTE Indoor outdoor ● Pay attention to dust prevention Step 1: sures when opening the hole. Choose installation location Φ55 5-10 Φ70 Recommend the installation location to the client and then confirm it with the client. Step 2: Step 4: Install wall-mounting frame...
  • Page 28 drain hose Hex nut diameter Tightening torque (N m) 15~20 30~40 45~55 insulating pipe NOTE 70~75 ● Add insulating pipe in the indoor drain hose in order to prevent condensation. ● The plastic expansion particles are not provided. Wrap the indoor pipe and joint of connection pipe with insulating pipe , and then wrap it Step 7: with tape.
  • Page 29 drain hose connection pipe Remove the wire clip; connect the power conn- band ection wire to the wiring terminal according to the color; tighten the screw and then fix the po- wer connection wire with wire clip. indoor power cord Bind them evenly.
  • Page 30: Test And Operation

    Test and operation Check after installation ● Check according to the following requirement after finishing installation. Items to be checked Possible malfunction Has the unit been The unit may drop, shake or installed firmly? emit noise. It may cause insufficient Have you done the refri- cooling(heating) capacity.
  • Page 31 Pipe expanding method NOTICE Improper pipe expanding is the main cause of refriger- ant leakage. Please expand the pipe according to the following steps: A: Cut the pipe ● Confirm the pipe length according to the distance of indoor unit and outdoor unit. ●...
  • Page 32: Specialist's Manual

    Specialist’s Manual Aptitude requirement for maintenance If any hot work is to be conducted on the refriger- man(repairs should be done only be ating equipment or any associated parts, appro- specialists). priate fire extinguishing equipment shall be avail- able to hand. Have a dry powder or CO2 fire a.
  • Page 33 Specialist’s Manual resistant to being corroded or are suitably protect- most refrigerants but the use of detergents con- ed against being so corroded. taining chlorine shall be avoided as the chlorine may react with the refrigerant and corrode the Checks to electrical devices ●...
  • Page 34 Specialist’s Manual Charging procedures ● Do not overfill cylinders. (No more than 80% volume liquid charge). In addition to conventional charging procedures, Do not exceed the maximum working pressure the following requirements shall be followed. of the cylinder, even temporarily. –...
  • Page 35 Specialist’s Manual to an acceptable level to make certain that flam- mable refrigerant does not remain within the lubricant. The compressor body shall not be heated by an open flame or other ignition sources to accelerate this process. When oil is drained from a system, it shall be carried out safely.
  • Page 36 GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: global@cn.gree.com Web: www.gree.com 600005068072...

Table of Contents