Related Manuals for Rippton CatchX PRO
Summary of Contents for Rippton CatchX PRO
- Page 1 CATCHX PRO BAIT BOAT QUICK START GUIDE Edited on 2022/11/11 Please visit https://rippton.com/tutorial to watch the video tutorial of CatchX PRO. PLEASE READ SECTION 6 AND 7 IN THE USER MANUAL BEFORE READING THIS GUIDE.
- Page 2 Dear Customer, Thank you for purchasing the CatchX Pro bait boat. CatchX Pro is an advanced smart fishing bait boat, which has a payload of 3kg and a range of 300 meters. With the ergonomic handle, it is easy to carry around with.
-
Page 3: Installation Of The Batteries
1. Installation of the Batteries Use your hand or your own screwdriver to unlock the battery compartments. 2. Control of LED Light Belt Double click the power button of the remote control to switch on/off both of the head LED light belt and the tail light belt. 3. -
Page 4: How To Use The Remote Control
4.1 Brief The CatchX Pro bait boat is capable of covering 300 meters controlled by its remote control. The remote control is equipped with a display screen and buttons of different functions as the image below shows. Please refer to Section 6&7 of the User... - Page 5 4.2 Preparation of the Remote Controller Step 1 Screw the rack Step 2 Install the antenna Step 3 Attach your mobile device to the mobile device holder clamp...
- Page 6 4.3 Operation of the Joystick TIP: Move the joystick to the right to the maximum extent for 3 seconds to unlock. 4.4 Releasing Berley and Hooked Fishing Line by the remote If you intend to use the remote to release berley and/or fishing line，please make sure the screen on the remote shows M (manual mode).
- Page 7 Notice: Preloading the map on the APP When using the CatchX Pro in any new area, before connecting the CatchX Pro to your mobile device, it is always necessary to enter the Rippton app first with internet connection, enter the operation interface (refer to 5.2.1 and 5.2.2 below) to finish preloading the map where you...
-
Page 8: Operation
: For the connection with the Hydrobat smart fish finder, please read the manual for the fish finder separately. 5.2 Operation Step 1: Open the Rippton app and tap “Device” on the top. Step 2: Find the CatchX Pro and tap “Enter”. - Page 9 Before setting a mission, please check the image below to understand what each icon stands for.
- Page 10 The Learner Mode (sailing range limited within 100m) is automatically on the first time you enter the page. It can be turned off in Parameter of Common Set. Step 3: Calibration After the boat connected with the APP, please tap the cog icon on top right of the APP interface to enter “COMMON SETTINGS”.
- Page 11 The boat will automatically finish the calibration on water by itself. Note: It’s always necessary to calibrate the CatchX Pro at new locations where are 3km away from the last you have used the boat at.
- Page 12 Step 4: Set a Route for Casting Mission 4.1 Tap the “Mission Management” button (in square 1) on the top of left side to start setting a route for your casting mission. Press the green button to confirm (in square 4.2 Tap the “H”...
- Page 13 CatchX Pro “Hopper Selection” to confirm which begins to sail, you need to confirm hopper or fishing line to be released which hopper to be released every on which waypoint. time CatchX Pro reaches a selected waypoint. ...
- Page 14 Step 6: Perform the Mission Tap “Start” in the right bottom corner. Slide to start. NOTE: The CatchX Pro will return to the home point automatically after the mission is completed. If you intend to cancel the ongoing mission, there are two methods: tap the “Return to Home Point”...
- Page 15 Step 7: Release the Hook When the CatchX Pro arrives the point where you want to release the hook, third button on the left side. You can also select the point to release the hook when selecting the hoppers before the mission starts.
- Page 16 6. Charging 6.1 CatchX Pro Bait Boat Direct charging ： 5.5/2.5 DC charging port (please refer to Picture1). Please note that both batteries must be inside the boat together when direct charging. It takes 4-6 hours to be fully charged; or...
Need help?
Do you have a question about the CatchX PRO and is the answer not in the manual?
Questions and answers