Front Panel Led Display; Rear Panel Cable Connections - D-Link DSL-604+ User Manual

Front Panel LED Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.
The LED indicators on the front panel include the Power, Status, ADSL Link/Activity, and WLAN indicators.
Each Ethernet LAN port displays a pair of indicators for monitoring connection speed (10M/100M), link status
and activity (Link/Act).
Power
Status
ADSL: Link
ADSL: Act
WLAN
Ethernet: 10M
100M
Ethernet: Link
Act

Rear Panel Cable Connections

Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are
also located on the back of the device. Connect the antennas to the antenna posts.
Antenna
post
Power Adapter:
Connect power here;
one 7.5V DC 1.5A
power connection
DSL-604+ ADSL Ethernet Router User's Guide
Steady green light indicates the unit is powered on.
Lights steady green during power on self-test. Once the connection status has
been settled, the light will blink green.
Steady green light indicates a valid ADSL connection. This will light after the
ADSL negotiation process has been settled.
Blinking green light indicates activity on the WAN interface.
Blinking green light indicates activity on the WLAN.
Steady green indicates a 100Mbps Fast Ethernet connection. For 10Mbps
Ethernet connection it is dark.
The rear panel of the Router provides access to the AC power adapter cord
connection as well as the port connections.
Ethernet LAN Ports: Connect
Factory
reset
button
RJ-14 console port used for configuration;
requires RJ-14 to RS-232 adapter
to Ethernet LAN;
Four RJ-45 crossed ports
4
ADSL (WAN Port):
Connect to ADSL line
one RJ-11 port
Antenna
post