Bluetooth Pairing - Akko 5087B V2 User Manual

5087B V2 Connection Guide
E
Bluetooth device 1
R
Bluetooth Device 2
T
Bluetooth Device 3
Y
2.4G wireless device
U
Wired mode

Bluetooth Pairing

After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination key
for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly.
After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes.
It will enter the hibernate state 15 minutes after entering the low-power sleep mode.
2.4G Pairing
After turning on the keyboard, press Fn+Y to enter the 2.4G mode. Then press Fn+Y for 3 seconds to enter the pairing
mode. Insert the receiver, and the green indicator light will blink quickly. After a successful pairing, the mode light will
stay on for 2 seconds. If no paired device is found after 30 seconds, the device will exit the pairing mode, and the mode
light will turn off, putting the keyboard into sleep mode.
After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes. It will enter the
hibernate state 10 minutes after entering the low-power sleep mode.
Short press to reconnect with
blue light blinks slowly;
Long press to pair with blue
light blinks quickly.
Short press to reconnect
with green light blinks slowly;
Restore lighting effects after
pairing completes.
Back Switch Indicator
Left: Windows(built-in power on)
Medium: Default Windows (built-in power off)
Right: Mac (built-in power on)
09 01