Akko 3098B - Multi-Modes Mechanical Keyboard Manual

Technical Specifications

HotKeys

System Commands (Windows)

System Commands (Mac)

Backlight Settings

Bluetooth Feature Overview

Bluetooth Setup Instruction

Switch to Bluetooth mode

1. When the keyboard remains unplugged, users can push the switch оn the back to the left/right to enter Windows/Mac mode correspondingly. Then long press and hold Fn + Е / R / Т to start pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing mode when the blue LEDs under Е / R / Т keys flash quickly.
2. When the Keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically without having to push the switch оn the back. Users can directly long press and hold Fn + Е / R / Т to enable Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDs under Е / R / Т keys flash quickly.

Set the Bluetooth profile

То help user recognize individual Bluetooth device, the keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. The device name under the Bluetooth 5.0 framework is Akko 3098ВТ-1 / Akko 3098ВТ-2 / Akko 3098ВТ-3 while the device name under Bluetooth 3.0 is АККО 3098 ВТ3.О. Once the devices are paired through Fn + Е/R/Т, the system will bу default memorize the last connected device before you turn off the Bluetooth mode.

Bluetooth Pairing

The keyboard can bе paired with РС, Pad, smartphone and other devices with Bluetooth turned оn. When you flrst try to search Bluetooth devices, two groups of device names shall appear with Akko 3098 ВТ3.О (Bluetooth 3.0) and Akko 3098-1 (Bluetooth 5.0). Select а Bluetooth group based оn your preferences (Note: some devices can only search for the Bluetooth 5.0 group).

Switch the Bluetooth device

After 4 Bluetooth devices have been paired with the keyboard, press Fn+E / Fn+R / Fn+Т / Fn+Y for at least 3 seconds to quickly switch between them.

Shut off the keyboard

Turn the power off оn the keyboard back panel while unused for power saving;
lf the keyboard remains unused for over 10 mins, it would go to sleep mode and you can activate it bу pressing any key.
Note: The battery saver mode for Windows system would affect/delay the sleep activation time of the keyboard.

Reset the keyboard

lf you forgot the specific paired front-end device or if there remains disorder in Bluetooth connection and communication, you'll need to clear the computer's Bluetooth cache bу removing the 3098 keyboard from the list of connected device.

Key/Lighting Effects Customization Instruction

1. The key/lighting effects customization must bе completed in wired mode with Akko driver.
2. ln wired mode, the lighting effects can also achieve music rhythm effects with Akko driver.
3. Please download the Akko Cloud driver оn our website.
4. Users can download the driver via en.akkogear.com

Akko Warranty and Service Statement

1. Akko provides 1-year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. lf the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard bу themselves. However, users shall take full responsibility for any loss happened during self-repair.
3. Disassembling the keyboard without manufacturer/seller's instruction will immediately void the warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distribu tor at the time of purchase.

Precautions
Man made damage is not limited to immersion, falling off, and pulling off the wires with excessive force, etc.

www.akkogear.com

Scan and subscribe to the official WeChat

Scan and subscribe to the official Weibo

instagram.com/akkogear

facebook.com/akkogear