Dry Operation - Haier HSU-18HVA103/R2 - annexe 1 Safety Instructions

Operation

Dry Operation

Remote controller
POWER/SOFT
HSU-18HA1(HVA1)03/R2(DB)
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
AUTO
Then Select DRY operation
On the displaying board,colorful displaying bar will
be light blue
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
o
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
o
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
LOW
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2
at LOW speed regardless of FAN setting.
5.Unit stop
Press ON/OFF button, the unit stops.
11
System Configuration
COOL DRY FAN HEAT
AUTO
MED HI
o
C,unit will run intermittently
Domestic Air Conditioner