SCS Sentinel DWH Installation And Operation Instruction Manual page 61

From the pop-up menu, tap the following
icons as they appear on the screens :

1. Tap Enable to activate Email Alert
or Disable to deactivate it.
2. Tap on the SMTP Server field.
A keyboard screen displays.
3. Enter your outgoing e-mail SMTP server (example: johndoe@gmail.com). You can
switch the keyboard from alphabetical characters to numbers/symbols and back again
by tapping the field to the left of the space bar. Tap Return. The Email Alert screen
displays again.
4. Repeat the previous step for the Password field. Tap Return. The password entered
here must be the same password as the password for the outgoing email account.
5. Repeat Step 3 for the Email To field. Only one incoming email account will be
accepted by the system. The incoming email account can be different from the
outgoing email account.
6. Tap OK to save the settings, then tap
If you are using Gmail as the outgoing SMTP server, check SSL and use the data in
the following table:
SMTP Server
SMTP Port
Username
Password
Email to
 
Smtp.gmail.com
465
XXXX@gmail.com
XXXXXXXXXX
XXXX@gmail.com
The screen displays
to return to the previous screen.
For Gmail
Enter this.
Enter this.
Enter your gmail address in full,
including @gmail.com.
Enter the password for this
gmail account.
Enter the email address where you
want the alerts sent.
20