Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec PGGS 10-20V NB
Summary of Contents for Trotec PGGS 10-20V NB
- Page 1 PGGS 10-20 V NB INSTRUCTIONS CORDLESS GLUE GUN...
-
Page 2: Table Of Contents
EU declaration of conformity via the following link: Information about the device.......... 7 Transport and storage............ 8 Start-up.................. 9 PGGS 10-20V NB Operation ................ 11 Available accessories............ 12 https://hub.trotec.com/?id=44543 Errors and faults.............. 13 Safety Maintenance ................ 14 Disposal ................ 14 General Power Tool Safety Warnings Warning Read all safety warnings, instructions, illustrations Information on the use of these instructions and specifications provided with this power tool. -
Page 3: Safety
• Prevent unintentional starting. Ensure the switch is in General Power Tool Safety Warnings – Work area the off-position before connecting to power source safety and/or battery pack, picking up or carrying the tool. • Keep work area clean and well lit. Clutter or dark areas Carrying power tools with your finger on the switch or invite accidents. - Page 4 • Keep cutting tools sharp and clean. Properly maintained General Power Tool Safety Warnings – Service cutting tools with sharp cutting edges are less likely to bind and are easier to control. • Have your power tool serviced by a qualified repair •...
- Page 5 • Do not use the glue gun in an environment with direct, Safety signs and labels on the battery and the charger cold wind. The device's efficiency decreases and energy Notice is lost. Do not remove any safety signs, stickers or labels from •...
- Page 6 Residual risks Warning Risk of suffocation! Warning of electrical voltage Do not leave the packaging lying around. Children may Electric shock due to insufficient insulation! use it as a dangerous toy. Check the device for damages and proper functioning Caution before each use.
-
Page 7: Information About The Device
Designation Information about the device Feed channel Device description Status LED The device PGGS 10-20V NB is a cordless glue gun for repairs On/off switch and tinkering. The device is suitable for bonding wood, plastic, Battery textiles, cardboard, paper, ceramic, leather, cork, glass and Glue stick metal. -
Page 8: Transport And Storage
Technical data Transport and storage Parameter Value Notice PGGS 10-20V NB Model If you store or transport the device improperly, the device may be damaged. Nominal voltage 20 V Note the information regarding transport and storage of Ambient temperature charging 0 °C to 45 °C the device. -
Page 9: Start-Up
Storage Charging the battery Before storing the device, proceed as follows: Notice • Switch off the device. The battery can be damaged in case of improper • Hold onto the mains plug while pulling the power cable of charging. the charger out of the mains socket. Remove the charger's mains plug before inserting or removing the battery. - Page 10 Inserting the battery Checking the battery charging status 1. Slide the battery (4) into the battery holder (8) until it locks The battery comes with an integrated battery level indication. in place. The battery status is displayed as follows by the three LEDs of the battery level indication (6): LED colour Meaning...
-
Page 11: Operation
Switching the device on and off Operation Wear your personal protective equipment when working with Tips and notes on handling the glue gun the device. 1. Slide the on/off switch (3) to position I. General information: ð The status LED (2) is illuminated in red. •... -
Page 12: Available Accessories
Gluing Available accessories Warning of hot surface Warning The nozzle might still be hot after use. Glue coming out Only use accessories and additional equipment of the nozzle can be hot. Risk of burns. specified in the instructions. Do not touch the nozzle bare-handed! Using insertion tools or accessories other than those Wear protective gloves! specified in the instructions may cause a risk of injury. -
Page 13: Errors And Faults
Liquid glue comes out of the feed channel: Errors and faults • The glue stick diameter is too small and / or the melting The device has been checked for proper functioning several point of the glue stick is too low. Only use suitable times during production. -
Page 14: Maintenance
Maintenance Disposal Always dispose of packing materials in an environmentally Activities required before starting maintenance friendly manner and in accordance with the applicable local Warning of electrical voltage disposal regulations. Do not touch the mains plug or the battery with wet or damp hands. - Page 15 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PGGS 10-20V NB and is the answer not in the manual?
Questions and answers