Shutter hardware vario-louvre fittings louvre end piece drilled in (8 pages)
Summary of Contents for Maco HAUTAU HS Comfort Drive
Page 1
HS Comfort Drive LIFT AND SLIDE FITTINGS/WINDOW AUTOMATION MANUAL Indoor operation with smartphone, HS Comfort Drive, 24 V DC wood/wood-aluminium/PVC, Scheme A/C Used exclusively for specialist companies. Copy of the original instructions...
Contents Important safety instructions Warranty Disposal Other applicable documents Intended use for the WiFi Box/ConfigTool app Features Overview of WiFi Box Installation of the WiFi Box Circuit diagram for WiFi Box Set up software Establishing the connection between a smartphone and the WiFi Box Setting up HS Comfort Drive for the HAUTAU ConfigTool app Operating HS Comfort Drive using a smartphone Changing the WiFi Box password...
Important safety instructions General information WARNING It is important to observe the following instructions to ensure safety for everyone. Incorrect installation may lead to serious injury or even death. Manufacturer’s declaration/technical standard The accessories contained in this document have been tested and manufactured in line with the applicable European directives.
Page 4
Important safety instructions (contd.) Safety instructions You must observe the safety instructions for the corresponding device families. See the relevant installation instructions at www.hautau.de/en/ Connection and installation conditions Before you put the device into operation, take into account the connection and installation conditions in the manual for the device series concerned.
Warranty HAUTAU’s General Terms and Conditions of Business apply to the accessories (online: www.hautau.de/en/). Disposal The crossed-out wheeled bin symbol indicates that you must not dispose of this electrical appliance or electronic device in the household waste at the end of its service life. You can return it to free collection points for old electrical appliances in your area or to other centres where they accept old appliances for recycling.
Explanation of terms This manual describes a left-hand version (a sash opening to the right) as an example. Any specifications for a right-hand configuration (a sash opening to the left) and for Schema C must be adapted accordingly. Measurements in mm. Diagrams without a scale are not necessarily to scale. Intended use for the WiFi Box/ConfigTool app If you wish to use a smartphone to control a HS Comfort Drive (lift and) slide system, the WiFi Box must be con- nected to the circuit board of the actuator concerned as shown in the circuit diagram.
Overview of WiFi Box Functional description 1 .. 7 Connection for ... 1 - Locking device The functions depend on the WiFi Box firmware 2 - Comfort keypad CLOSE 3 - Comfort keypad OPEN version, the type of products used with the 4 - Output 24 V 5 - HAUTAU bus HAUTAU interface and the HAUTAU ConfigTool...
For Scheme C: Connection to the fixed sash actuator circuit board White Brown HAUTAU bus Green (service connection, WiFi Box) 1 2 3 4 5 6 7 WiFi Box The address for HS Comfort Drive is 103 (when delivered). Set up software Download the free HAUTAU ConfigTool app ...
Establishing the connection between a smartphone and the WiFi Box I MPORTANTNOTE: P riortosettingupandactivatingtheWiFiBoxwiththeConfigTool,ensurethe(liftand)slide systemiscalibratedandfunctionalaspertheinstallationinstructionsforSchemeAorC. It must also be equipped with a control keypad or control button. The WiFi Box must be installed ready for operation and connected to a 24 V DC power supply (HS Comfort Drive). The search for new Wi-Fi networks needs to be enabled on the smartphone.
Setting up HS Comfort Drive for the HAUTAU ConfigTool app Open Tools menu Launch ConfigTool app Click on Find devices ConfigTool Another actuator may have already been detected Accept detected device (HS Comfort Drive) Launch device search 103 = address for HS Comfort Drive (when delivered).
Operating HS Comfort Drive using a smartphone Launch ConfigTool app Select HS Comfort Drive device ConfigTool OPEN STOP CLOSE Sliding sash Sliding sash Sliding sash unlocks, stops moves, lowers and lifts and moves locks The sliding sash can be operated in both di- rections after STOP has been pressed.
Page 12
Changing the WiFi Box password (contd.) Open Settings menu enter new password Password has been changed Accept password Übernehmen Connect smartphone to WiFi Box again: enter new password Press Connect The panel can now be operated...
Changing the WiFi Box name The WiFi Box name can be customised. However, this is not absolutely necessary. Open Settings menu Select field with the old WiFi Box name HAUTAU-WLAN-Box-H0000390 Enter new name and press OK...
WiFi Box optical signals and button functions Signal optical indicator and WPS/Reset button Button Signal Position LED flashes WiFi Box in operation Pressed briefly (< 1 s) LED on WPS log-on Pressed for longer (> 1... 5 s) LED flashes (after 2 s) Wi-Fi settings reset to factory settings Complete reset to factory settings.
Technical data for the Wi-Fi Box Operational power supply Wireless LAN Supply voltage 24 V DC (–10%/+30%) Radio standard 802.11n/g/b Ripple ≤ 20% in relation to the nominal Encryption Yes, WPA voltage Range Without interferences: about Wattage 10 m, depending on the building in transmission mode about 1.5 W Log-on per WPA...
Page 16
Tel.: +49 5724 3930 Email: info@hautau.de www.hautau.de/en/ This printed document is continually updated. Created: 08/2023 – amended: 06/ 2024 Order no. 759974 You will find the latest version at https://www.maco.eu/assets/759974 or scan the QR code. All rights reserved. Subject to change.
Need help?
Do you have a question about the HAUTAU HS Comfort Drive and is the answer not in the manual?
Questions and answers