D-Link Express Ethernetwork DI-604 Owner's Manual page 45

Networking Basics
Assigning a Static IP Address
•
Highlight
Internet
Protocol
(TCP/IP)
•
Click Properties
•
Select Use the following
IP address
in the Internet Protocol
(TCP/IP) Properties
window,
•
Input your IP address and
subnet mask. (The IP
Addresses on your network
must be within the same
range. For example, if one
computer has an IP
Address of 192.168.0.2,
the other computers should
have IP Addresses that are
sequential, like
192.168.0.3 and
192.168.0.4. The subnet
mask must be the same for
all the computers on the
network.)
•
Input your DNS server
addresses. (Note: If you
are entering a DNS
server, you must enter
the IP Address of the
Default Gateway.)
The DNS server information
will be provided by your ISP
(Internet Service Provider.)
D-Link DFE-530TX+
•
Click OK
You have completed the assignment of a Static
IP Address. (You do not need to assign a Static
IP Address if you have a DHCP-capable
Gateway/Router.)