D-Link Express Ethernetwork DI-604 Owner's Manual page 20

ADVANCED>FILTER
MAC Address Control allows you to assign different access rights for different
users and to assign a specific IP address to a certain MAC address.
MAC Address Control: Check Enable to enable the MAC Address Control. All of
the settings in this page will take effect only when Enable is checked.
Connection control: Check Connection control to control what wired and wireless
clients can connect to this device. If a client is denied connection to this device, it
means the client can't access the Internet either. Choose "allow" or "deny" to allow
or deny the clients, whose MAC addresses are not in the "Control table" (please see
below), to connect to this device.
MAC Address
IP Address
MAC address indicates a specific client.
Expected IP address of the corresponding
client. You may choose to leave this field
empty.
When "Connection control" is checked,
C
check "C" to allow the corresponding client
to connect to this device.
20