Fan Operation; Select Operation Mode - Haier HSU-09LEB13-H - annexe 1 Operation Manual

Operation

Fan Operation

(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)

(2) Select operation mode

Press MODE button. For each press, operation
mode changes as follows:
AUTO COOL
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
LO MED
Unit runs at the speed displayed on LCD.
(4)
Unit stop
Press ON/OFF button, the unit stops.
Hints
In FAN operation mode, the unit will not operate in COOL mode but only in FAN mode ,
AUTO is not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
DRY FAN
HI
11
ON/OFF TEMP
1
4
MODE
SET
2
FAN
TIMER
3
SWING CLOCK
SLEEP
LOCK
RESET