Page 4
KSOZ001 After the assembly of the upper part of the de- vice, measure the distance between the profiles or place the construction on the ground and dig the hole (at least 60 cm deep). The anchors ( part number 1) should be placed vertically in the gro-und with the help of the spirit level, so its upper edge is 20 cm above the ground level.
Page 5
KSOZ001 To prevent movement of the clamp, place a piece of a rubber be- tween the rod and the clamp.
17. If the assembly of the device is not possible because of the technical errors (missing or missplaced holes, uneven parts), contact us on the given e-mail adress: biuro@k-sport.com. pl. In the message include photos of defected parts.
Need help?
Do you have a question about the KSOZ001 and is the answer not in the manual?
Questions and answers