Page 4
KSOZ010 After the assembly of the upper part of the device, measure the distance between the profiles or place the construction on the gro-und and dig the hole (at least 60 cm deep). The anchors ( part number 2) should be pla-ced vertically in the ground...
Page 5
17. If the assembly of the device is not possible because of the technical errors (missing or missplaced holes, uneven parts), contact us on the given e-mail adress: biuro@k-sport.com. pl. In the message include photos of defected parts.
Need help?
Do you have a question about the KSOZ010 and is the answer not in the manual?
Questions and answers