Sdi/sdti 4-channel analog/
digital aes audio embed and
optical transmitter (36 pages)
Summary of Contents for Artel FiberLink 3360 Series
Page 1
MANUAL FiberLink® 3360 Series 3G/HD/SD-SDI Transmission and AES/EBU Digital Audio Embedding over one single mode or multimode fiber Installation and Operations Manual WWW.ARTEL.COM...
FiberLink 3360 Series Welcome Thank you for purchasing Artel Video Systems’ FiberLink 3360 Series . The 3360 Series is used to transmit 3G/HD/SD-SDI over a single fiber optic core and embed up to 8 channels (4 Pairs) of AES/EBU digital audio . Alternatively, you can pass previously embeded audio and data as well, or replace previously embeded audio .
2 .97 Gbps (SMPTE 424M-2006) Equalization Automatic up to 100m of Belden 1694A at 2 .97Gbps, 200m at 1 .485 Gbps and 350m at 270 Mbps Return Loss >10dB up to 2 .97 Gbps Page 4 FiberLink 3360 Series User’s Manual...
1100 - 1620 nm Minimum Input Sensitivity -17 dBm at 2 .97 Gbps; -22 dBm at 1 .485 Gbps -24 dBm at 270 Mbps; Maximum Input Power 0 dBm Serial Video BNC Output Number of Outputs FiberLink 3360 Series User’s Manual Page 5...
0-14 dB at 2 .97 Gbps 0-17 dB at 1 .485 Gbps 0-20 dB at 270 Mbps Multimode Fiber (50u) 0-14 dB at 2 .97 Gbps 0-17 dB at 1 .485 Gbps 0-20 dB at 270 Mbps Page 6 FiberLink 3360 Series User’s Manual...
*Distance specifications are approximate, based upon connecting a 3360 Transmitter to a 3360 Receiver, and are not guaranteed . Artel cannot estimate or guarantee operating loss budgets when the 3360 Series is used with other, non-FiberLink devices . Operating loss budget must not be exceeded .
FiberLink 3360 Series Installation Instructions The FiberLink 3360 Series of fiber optic transmission systems are ready for immediate use and do not require any special tools or equipment . However, an Optical Power Meter, such as the FiberLink 6615, can be useful in determining optical loss budgets during your systems design and maintenance .
The unit cannot be used as an audio only transmission system. Please review the Indicator LEDs section of this manual for a comprehesive understanding of the video and audio status for each unit . FiberLink 3360 Series User’s Manual Page 9...
Indicator LEDs FiberLink 3360 Series Indicator LEDs The FiberLink 3360 Series has several indicator LEDs that are used to monitor the state of the unit . Card versions have an additional Alarm LED . Transmitter LEDs Status Definition Power Indicates that correct power has been applied .
Page 11
Audio Output BNC is being muted . Alarm Loss of input video (card version only) Note: The 3G, HD and SD LEDs indicators are off when a non-standard signal is applied. FiberLink 3360 Series User’s Manual Page 11...
Customer Service Department for further assistance . If you suspect your problem is caused by the optics or the fiber optic cable, and you have an optical power meter, please take the appropriate measurements prior to contacting support . Page 12 FiberLink 3360 Series User’s Manual...
FiberLink 3360 Series Maintenance and Repairs The FiberLink 3360 Series has been manufactured using the latest semiconductor devices and techniques that electronic technology has to offer . They have been designed for long, reliable and trouble-free service and are not normally field repairable .
FiberLink 6654 Dual Wavelength Single Mode Light Source The FiberLink Light Source offers a laser output at selectable wavelengths, allowing for convenient, on- site testing of fiber networks during construction and maintenance procedures . Page 14 FiberLink 3360 Series User’s Manual...
Page 15
FiberLink 3360 Series FiberLink 3360 Series User’s Manual Page 15...
Page 16
• Solutions for most video, audio, and data formats • Multimode and single mode versions • Designed and manufactured in the USA • Training and installation support available • 24x7x365 technical support available Artel Video Systems Corp. 5B Lyberty Way, Westford, MA 01886 USA T: 978-263-5775 F: 978-263-9755 All specifications subject to sales@artel.com...
Need help?
Do you have a question about the FiberLink 3360 Series and is the answer not in the manual?
Questions and answers