Haier HSU-07RU03/R2 - annexe 2 Manual page 20

Operation
POWER/SOFT Operation
Remote controller
TEMP
HEALTH FAN
SWING
MODE H.AIR.
SLEEP FRESH
SET
CLOCK
TIMER
LOCK LIGHT CODE RESET
POWER Operation
When you need rapid heating or cooling, you can use this function.
Selecting of POWER operation
Press POWER/SOFT button. Every time the button is pressed,display
changes as follows:
Stop the display at
In POWER operation status:
For model DB:
In HEAT or COOL mode, compressor runs in high frequency
for 15 min then returns to original status setting.
For model ON/OFF:
In HEAT or COOL mode, fan speed automatically takes "strong"
for 15 min then returns to original status setting.
To cancel POWER operation
Press POWER/SOFT button twice ,POWER/SOFT disappears.
SOFT Operation
You can use this function when silence is needed for rest or reading.
Selecting of SOFT operation
Press POWER/SOFT button. Every time the button is pressed,display
changes as follows:
Stop the display at
In SOFT operation mode, fan speed automatically takes"ultra-low"
To cancel SOFT operation
Press POWER/SOFT button twice ,POWER/SOFT disappears.
Hints:
During POWER operation, in rapid HEAT or COOL mode, the room
will show inhomogeneous temperature distribution.
Long period SOFT operation will cause effect of not too cool
or not too warm.
SOFT
POWER
SOFT
POWER
19
BLANK
BLANK