Page 2
Instruction Manual �������������������������������������������������������������������������������������������EN I Manuel d’instructions ������������������������������������������������������������������������������� FR-CA I Manual de instrucciones���������������������������������������������������������������������������� ES-LA I...
Important Safety Instructions the physical barrier is not a trip hazard� 4� Only use as described in this manual� Only IMPORTANT SAFETY INSTRUCTIONS use attachments recommended or sold by the READ ALL INSTRUCTIONS BEFORE manufacturer� USING THIS APPLIANCE. 5� Do not handle plug or appliance with wet hands� 6�...
Page 4
13� Do not allow the Appliance to pick up large agent in order to avoid a hazard� objects like stones, large pieces of paper or 19� Do not use with a damaged power cord or any item that may clog the Appliance� plug�...
Page 5
25� When not using the Docking Station, unplug damaged or modified� Damaged or modified from outlet when not in use and before batteries may exhibit unpredictable behavior servicing� resulting in fire, explosion or risk of injury� 26� The Appliance must be used in accordance 31�...
Page 6
36� Do not operate the vacuum in a room that has 44� To Reduce The Risk Of Injury From Moving lit candles on furniture that the vacuum may Parts – Unplug Before Servicing� accidentally hit or bump into� 45� Risk Of Injury� Brush May Start Unexpectedly� 37�...
Page 7
Reorient or relocate the receiving antenna� Direct current Increase the separation between the equipment and receiver� Alternating current Connect the equipment into an outlet on a circuit This Device Complies with DHHS Radiation Rules, different from that to which the receiver is connected� 21CFR Chapter 1, Subchapter J�...
Page 8
RF exposure warning SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This equipment complies with FCC radiation exposure This appliance must be grounded� If it should malfunction limits set forth for an uncontrolled environment� or breakdown, grounding provides a path of least resistance This equipment must be installed and operated in for electric current to reduce the risk of electric shock�...
Page 9
Device Update For INDOOR household use ONLY� This device contains licence-exempt transmitter(s)/ Typically, some devices are updated bi-monthly, but not receiver(s) that comply with Innovation, Science and always so specific� Economic Development Canada’s licence-exempt RSS(s)� Operation is subject to the following two conditions: Some devices, especially those that went on sale more than three years ago, will only be updated if a critical (1) This device may not cause interference�...
Package Contents Robot Base OMNI Station Power Cord Instruction Manual Side Brush Instruction Manual Note: • Figures and illustrations are for reference only and may differ from actual product appearance� Product design and specifications are subject to changes without notice�...
Product Diagram RESET Button Restore to default settings: Press and hold RESET Button for 5 sec- Robot onds� After you hear the voice prompt, the startup music will be played and the robot will be restored to default settings� Button on Robot Short Press: Start/Pause Top Cover Long Press for 3s: Return to charge...
Page 12
Charging Contacts Mop Washing Tray Note: • If the indicator light flashes red, check YEEDI App for details about the malfunction� • Wipe the charging contacts of the OMNI Station with a dry cloth if robot is unable to get charged�...
Page 13
Sensors Name Functional Description With Laser Ranging-measuring the distance between Robot d-ToF and surroundings through the time difference of reflection, it can Laser Module map according to the objects around while Robot is moving� Detection of 10 m� The sensor emits infrared rays and receives the light reflected from obstacles in front of it�...
Notes before Cleaning Tidy up the area to be cleaned by putting furniture, such as chairs, in Put away objects including cables, cloths and slippers, their proper place� etc� on the floor to improve the cleaning efficiency� It may be necessary to place a physical barrier at the edge of a Before using the product on a rug with tasseled edges, drop to stop the unit from falling...
Quick Start Before using, please remove all protective materials� Installation The sound of Click indicates proper installation� Click Click 15 EN...
Page 16
North America (refer to local regulatory agency)� • If you are using a network extender/repeater, the network name (SSID) 2� Search the YEEDI to download the App� and password are the same as your primary network� • Please enable the WPA2 on your router�...
Page 17
(depending on different products) Assemble the Station requires users to download and use YEEDI App, which is constantly updated� You need to agree to our Privacy Policy and User Agreement before we can process some of your basic and necessary information and enable you to operate the product�...
Page 18
≥ • If there are reflective objects such as mirrors and reflective skirting • It is recommended to use YEEDI Cleaning Solution (sold separately)� lines near the Station, the bottom 14 cm of that should be covered� Using other cleaning solution may cause robot slipping, water tank •...
Page 19
Charge Robot Make sure the Station is connected to the power supply� Use the YEEDI App to recall robot to enter the Station to charge it up� "I" = ON,"O"= OFF. • It is recommended that robot start cleaning from the Station� Do not •...
Page 20
• Do not use a rag or any other object to scratch the Mopping Pad Plates� • When the YEEDI App prompts that the mops need to be replaced, please replace them in time� Explore more accessories at YEEDI App...
Page 21
5. Back to Station Station Make sure the Station is connected to the power supply� Use the YEEDI When robot is in the Station, short press to start/pause� Long App to recall robot to enter the Station to charge it up�...
Laser Module Mop Washing Tray About 150 days Clean Water Tank Every 3 months Dirty Water Tank Once per month Dust Collection Cabin Once per month OMNI Station Once per month Note: Explore more accessories at YEEDI App or at https://www�yeedi�com�...
Page 23
Note: • Please rinse the filter with water as shown above� • Do not use finger or brush to clean the Filter� Note: Completely dry the filter before use. Explore more accessories at YEEDI App or at https://www�yeedi�com� 23 EN...
Page 24
Maintain Brush and Side Brush Brush Side Brush • Explore more accessories at YEEDI App or at https://www�yeedi�com�...
Page 25
Maintain Other Components • Rotate the Module to clean the lens gently� • Wipe the components with a clean, dry cloth� Avoid using cleaning sprays or detergents� 25 EN...
Page 26
• Explore more accessories at YEEDI App or at https://www�yeedi�com�...
Page 27
Maintain OMNI Station Note: • Please don't enable self-clean when robot is working� • If there is remaining dirty water in the Mop Washing Tray, the Station will drain the water first after a long press on � Please long press start self-clean�...
Page 28
Maintain Mop Washing Tray 1. Take the Detachable Tray and Base Filter out for washing. 2. Install Note: Please install Mop Washing Tray properly to prevent malfunction�...
Page 29
Maintain Dust Bag 1. Discard the Dust Bag. Click Hold the Handle to lift out the Dust Bag, which can effectively prevent dust leakage� 2. Clean the Dust Collection Cabin with a Dry Cloth and Put a New 3. Close the Dust Collection Cabin. Dust Bag in.
Page 30
STORAGE Please fully charge and switch OFF the robot before storage� Please recharge it every 1�5 months to prevent the battery from over- discharge� Note: • Robot can't be charged when the power is turned off� • When robot is not working, it is recommended to keep it powered ON and charging�...
Find the restored map in the Map Management and tap “Use This Map” The map is lost� The map might be lost if you move robot when cleaning� to retrieve it� You can lock the map in the YEEDI App� If this problem persists after trying the above solutions, please restart mapping�...
Page 32
Robot gets stuck while work- Robot might be stuck under furniture with an entrance of similar Please set a physical barrier, or set a Virtual Boundary via the YEEDI App� ing and stops� height� Tidy up the house� Or set a physical barrier� Or set a Virtual Boundary via Robot is stuck in a narrow area�...
Page 33
After returning to the Station, Robot does not empty the Dust In Do Not Disturb mode, Robot will not empty the dust Turn off Do Not Disturb mode in YEEDI App or manually start Bin� after returning back to the Station�...
Page 34
Malfunction Possible Causes Solutions Please rotate and press the driving wheels to check whether there is any foreign object wrapped or stuck� If there is any foreign ob- Driving wheels are blocked� Driving wheels are blocked by foreign objects� ject, please clean it in time� If this problem persists, please contact Customer Support for help�...
Page 35
Rated Input Current(Charging) Power(Emptying) Power(Hot Water Washing Mop) Rated Output :2400-2483�5MHz;BT:2400-2483�5MHz Wi-Fi Output power of the wireless module is less than 100mW� Note: Technical and design specifications may be changed for continuous product improvement� Explore more accessories at https://www�yeedi�com� 35 EN...
Page 36
Instructions de sécurité importantes d’un escalier, vous devriez utiliser l’appareil afin de vous assurer qu’il est en mesure de détecter INSTRUCTIONS IMPORTANTES DE la marche sans tomber� Il pourrait être nécessaire de placer une barrière physique au bord du point SÉCURITÉ...
Page 37
11� N’utilisez pas l’appareil dans une pièce où dort un d’alimentation comme une poignée, ne refermez nourrisson ou un enfant� pas une porte sur le cordon d’alimentation et 12� Pour utilisation À L’INTÉRIEUR SEULEMENT� ne tirez pas le cordon d’alimentation autour N’utilisez pas l’appareil à...
Page 38
21� Retirez l’appareil de la station d’accueil et l’autre� Un court-circuit des bornes de la batterie mettez l’appareil HORS TENSION en utilisant peut causer des brûlures ou un incendie� son interrupteur d’alimentation avant de retirer la 29� Dans des conditions abusives, du liquide peut batterie pour la mise au rebut de l’appareil�...
Page 39
33� Faites effectuer l’entretien par un réparateur Pour faire remplacer la batterie du robot, veuillez qualifié, uniquement avec des pièces de rechange communiquer avec le service à la clientèle� identiques� Vous vous assurerez ainsi de maintenir 42� Si le robot ne sera pas utilisé pendant une période la sécurité...
Page 40
1� Branchez l’appareil uniquement dans une prise ne se produiront pas dans certaines installations� Si cet correctement mise à la terre� Consultez les appareil cause des interférences nuisibles à la réception des signaux de radio ou de télévision, qui peut être instructions de mise à...
Page 41
Cet appareil contient des émetteurs/récepteurs exempts maintenue entre cet appareil et toute personne durant de licence qui sont conformes aux normes RSS l’utilisation de l’appareil� d’Innovation, Sciences et Développement économique À des fins de conformité, l’utilisation à une distance Canada� L’utilisation est sous réserve des deux conditions moindre que celle-ci n’est pas recommandée�...
Page 42
fiche doit être insérée dans une prise appropriée qui est de licence qui sont conformes aux normes RSS correctement installée et mise à la terre conformément à d’Innovation, Sciences et Développement économique toutes les ordonnances et à tous les codes locaux� Canada�...
Contenu de l’emballage Robot Base Station OMNI Cordon d’alimentation Instruction Manual Manuel d’instructions Brosse latérale Remarque : • Les figures et les illustrations sont offertes à titre de référence seulement et peuvent être différentes du produit réel� La conception du produit et ses spécifications sont assujetties à...
Diagramme schématique du produit Touche de réinitialisation « RESET » Pour rétablir les paramètres par défaut : Appuyez sur la touche de réinitialisation Robot « RESET » et maintenez-la enfoncée pendant 5 secondes� Après le message vocal, la musique de démarrage jouera et le robot sera réinitialisé aux paramètres Bouton sur le robot par défaut�...
Page 45
Plateau de lavage de la vadrouille Remarque : • Si le voyant d’état clignote en rouge, consultez l’application YEEDI pour plus de détails sur le mauvais fonctionnement� • Essuyez les contacts de recharge de la station OMNI avec un chiffon sec si le robot ne peut pas se recharger�...
Page 46
Capteurs Description fonctionnelle Grâce à la mesure au laser de la distance entre le robot et les environs au moyen de la différence de temps de réflexion, le d-ToF système peut établir une carte en fonction des objets qui se Module laser trouvent aux alentours pendant que le robot se déplace�...
Remarques précédant le nettoyage R a n g e z l a z o n e à n e t t o y e r e n Pour améliorer l’efficacité du nettoyage, rangez les remettant les meubles, comme les objets, comme les câbles, les vêtements, les pantoufles chaises, à...
Démarrage rapide Avant d’utiliser l’appareil, veuillez retirer tous les matériaux de protection� Installation Le son du clic indique une installation adéquate� Cliquez Cliquez FR-CA...
Page 49
• N’utilisez pas de réseau privé virtuel (RPV) ou de serveur mandataire� • N’utilisez pas de réseau caché� • WPA et WPA2 utilisant le cryptage TKIP, PSK, AES/CCMP� 2� Recherchez YEEDI pour télécharger l’application� • Le protocole WEP EAP (Enterprise Authentication Protocol) n’est pas pris en charge�...
Page 50
être activées à l’aide de l’application YEEDI, mais vous pourrez quand même utiliser les fonctions de base de ce produit pour un fonctionnement manuel� Obtenez la version complète du manuel d’instructions...
Page 51
≥ • Si des objets réfléchissants, comme des miroirs et des plinthes Il est recommandé d’utiliser la solution de nettoyage YEEDI (vendue réfléchissantes, se trouvent près de la station, recouvrez-les jusqu’à séparément)� Si vous utilisez une autre solution de nettoyage, le robot 14 cm à...
Page 52
Charger le robot Assurez-vous que la station est connectée au bloc d’alimentation� Utilisez l’application YEEDI pour rappeler le robot afin qu’il entre dans la station pour se recharger� « I » = SOUS TENSION, « O » = HORS TENSION.
Page 53
• Ne retirez pas fréquemment les tampons nettoyeurs lavables� • N’utilisez pas de chiffons ou d’autres objets pour frotter les plaques pour tampon nettoyeur� • Lorsque l’application YEEDI vous indique que les tampons nettoyeurs doivent être remplacés, veuillez les remplacer sans attendre� Découvrez d’autres accessoires dans l’application YEEDI ou à...
Page 54
Assurez-vous que la station est connectée au bloc d’alimentation� Lorsque le robot est dans la station, appuyez brièvement sur pour Utilisez l’application YEEDI pour rappeler le robot afin qu’il entre dans la le démarrer ou le mettre en pause� Appuyez longuement sur pour station pour se recharger�...
Réservoir d’eau propre Tous les 3 mois Réservoir d’eau sale Une fois par mois Bac de collecte de poussière Une fois par mois Station OMNI Une fois par mois Remarque : Découvrez d’autres accessoires dans l’application YEEDI ou à l’adresse https://www�yeedi�com� FR-CA...
Need help?
Do you have a question about the S12 and is the answer not in the manual?
Questions and answers