Related Manuals for yeedi cube
Summary of Contents for yeedi cube
- Page 1 MANUALE DI ISTRUZIONI РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ คู่ ่ � มื ื อ การ ใช้ ้ ง าน BU K U P ET U N JU K 產品使用說明書 M A NU AL A RA H AN cube Robot Vacuum and Mop...
- Page 2 Important Safety Instructions curtains and tablecloths off the floor. 3. If there is a drop off in the cleaning area due IMPORTANT SAFETY INSTRUCTIONS to a step or stairs, you should operate the When using an electrical Appliance, basic Appliance to ensure that it can detect the step precautions should always be followed, including without falling over the edge.
- Page 3 (below -5˚C/23˚F or above 40˚C/104˚F). Station by the power cord, use the power 11. Keep hair, loose clothing, fingers, and all cord as a handle, close a door on the power parts of body away from any openings and cord, or pull power cord around sharp edges moving parts.
- Page 4 24. Remove the Appliance from the OMNI plug the OMNI Station. Station, and turn OFF the power switch to 32. WARNING: For the purposes of recharging the Appliance before removing the battery the battery, only use the detachable supply for disposal of the Appliance. unit CH2251 provided with the Appliance.
- Page 5 No surveillance of For EU Declaration of Conformity information, visit public places, especially with clandestine intent https://service.yeedi.com/pages/user-manuals . and/or on the part of the employer without justified reasons. Such not justified use is in the risk and For UK responsibility of the user only.
- Page 6 Edge Brushes Water Tank Plug Instruction Manual (Pre-installed with UFO Water Tank, Dustbin, Multi-Surface Main Brush,Washable Filter and Easy- to-Clean Mopping Pad) Cube Station Detachable Base Station Extension Pad Power Cord (Pre-installed with Dirty Water Tank and Dust Bag) Note: 1.
- Page 7 1. Package Contents/1.2 Product Diagram Robot Side View Robot Top View CLEAN Button (Auto Clean Button) SPOT Button (Spot Cleaning HOME Button Button) Power Switch (Return to Station Button) "I"=ON, Dust Disposal Port "O"=OFF. Dustbin Dustbin Release Button Charging Contacts Robot Bottom View Universal Wheel Anti-Drop Sensors...
- Page 8 1. Package Contents/1.2 Product Diagram UFO Water Tank Cube Station Water Tank Plug Dustbin Cover Water Inlet Water Tank Lock Pick-up Handle Dust Bag Dirty Water Tank Built-in Electric Scrubber Dustbin Filter Detachable Base High-Efficiency Filter Sponge Filter Filter Net Note: 1.
- Page 9 Before using the Robot on a rug with tasseled Please make sure that the Robot has created edges, please fold the edges under the rug. a home map in the yeedi App before it starts Note: Do not use the mopping function on the cleaning.
- Page 10 2. Mapping and Cleaning/2.2 Notes before Using Remove all protection materials Lift the Scrubber and install the Detachable Base. Please remove all protection materials on the Robot before use. Step 1: Lift the Scrubber and a "click" sound will be heard; Step 2: Push the Detachable Base into the Station on a flat surface.
- Page 11 Install the Station Extension Pad. Step 1: Hold the handle on the Water Tank with one hand and slide Step 1: Place the Cube Station against the wall in a large space and down the lock with your thumb to lift the Tank upward.
- Page 12 Using Download the yeedi App to experience more functions: Turn on the power switch, put the Robot near the Cube Station and press the HOME Button. The Robot will Open "Scan" in your mobile phone to scan the QR code on the Method 1: automatically return to the Station to charge.
- Page 13 Network setup steps: 1. Please turn on your mobile phone Bluetooth and Wi-Fi; 2. Make sure that yeedi cube Robot Vacuum and Mop is on; 3. Open the yeedi App; 4. Scan the QR code on the Robot using the yeedi App, complete "Confirm access to the setup mode", "confirm the device and...
- Page 14 Function of the SPOT Button (Spot Cleaning Button) Function of the CLEAN Button (Auto Clean Button) • Please ensure that the Robot is on the Cube Station and is fully • Please place the Robot in the area to be cleaned before starting.
- Page 15 Function of the HOME Button (Return to Station Button) Button combination for restoring default setting • When the Robot is outside the Cube Station, press the HOME Button • Press the SPOT and HOME Buttons at the same time for 5 seconds.
- Page 16 Robot alarm status CLEAN flashes Indicator Light Standby/network setup The white light is succeeded/Base Station solid on docking successful Cube Station lighting effect The white light is Charging/Start up/Robot flashing loading/Firmware update HOME Indicator The white light is Return to Station Light...
- Page 17 Anti-Drop Sensors Robot Charging Contacts Station Charging Contacts Pins Detachable Base and Filter Once every 2 weeks Dirty Water Tank After each mopping Note: yeedi manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.
- Page 18 3. Maintenance/3.2 Dustbin and Washable Filter Press the Dustbin Release Button to remove the Dustbin Open the Filter Net, remove the fine Washable Filter and the High-Efficiency Filter Assembly Press the Dustbin Cover Release Button to empty the Clean the dust on both sides of the Filter Net with the Multi- Dustbin Function Cleaning Tool...
- Page 19 3. Maintenance/3.2 Dustbin and 3. Maintenance/3.3 Vision and Washable Filter Laser Fusion Navigation System and Edge Detection Sensors Wash High-Efficiency Filter Assembly, Sponge Filter and Dustbin with water Please wipe with a clean soft cloth, and do not use detergent. Wipe Vision and Laser Fusion Navigation System Air-dry High-Efficiency Filter Assembly, Sponge Filter and Dustbin...
- Page 20 1. Sensitive electronic components are contained in the Charging Contacts. Please use dry cloth when cleaning. Do not use wet cloth to prevent damage. 2. Before cleaning the Robot Charging Contacts and Station Charging Contacts Pins, turn the Robot OFF and unplug the Cube Station.
- Page 21 3. Maintenance/3.5 Multi-Surface 3. Maintenance/3.6 Edge Brushes Main Brush Remove Edge Brushes Clean Multi-Surface Main Brush Remove any foreign objects caught in the Multi-Surface Main Brush with the Multi-Function Cleaning Tool. Clean Edge Brushes with the Multi-Function Cleaning Tool Note: Before cleaning the Robot, turn it OFF.
- Page 22 3. Maintenance/3.7 Driving Wheels and Universal Wheel Clean Driving Wheels Clean Universal Wheel Note: Please check regularly whether the Edge Brushes, Main Brush, Driving Wheels and Universal Wheel have picked up excessive amounts of hair or trapped foreign objects to avoid abnormal sound during cleaning.
- Page 23 3. Maintenance/3.8 Dirty Water Tank, Detachable Base and Filter Empty Dirty Water Tank Pull up and remove Filter Detachable Base Clean Detachable Base Remove the Detachable Base regularly. (Lift the Scrubber, press the buttons on both sides of the Detachable Base and pull it out in parallel.) Note: After rinsing, please dry the Detachable Base and Filter with a soft cloth or put in a cool place.
- Page 24 3. Maintenance/3.8 Dirty Water Tank, Detachable Base and Filter Install Detachable Base Wipe Filter Install Filter Lower Scrubber Press down and when you hear a "click", the Filter is in place. Be sure to lower the Scrubber. Note:...
- Page 25 4. Troubleshooting Problems encountered during use can refer to the following solutions. Malfunction Possible Causes Solutions The maximum number of devices con- 1. Delete devices connected to the router. nected to the router has been reached. 2. Connect the Robot to a new router. Incorrect Wi-Fi username or password Connect to the Wi-Fi and enter the correct username and entered.
- Page 26 The Cube Station is not connected to the power supply. Make sure that the Cube Station is connected to the power supply. 1. If you are not going to use the Robot for a long time, please charge it every three months.
- Page 27 Station. The Robot did not start cleaning from the Pad is installed, but no water is 2. Please move the Robot to a location near the Cube Station. Press Station. coming out of the Robot while the HOME Button to return the Robot to the Cube Station;...
- Page 28 1. Remove the Detachable Base, clean and dry it before installing. The Robot has slipped. 2. Wipe any water or oil stains at the front of the Cube Station and on the Driving Wheels. 1. Please install the Detachable Base properly by following the instructions in the "Notes before Using"...
- Page 29 Cleaning Sink. the Base and reinstall it after removing any foreign of water. objects. The above has been performed but the voice Unplug the power socket of the Cube Station and re- alarm remains. plug in.
- Page 30 20 V Frequency bands 2400-2483.5MHz Networked Standby Power Less than 2.00W Note: 1. Output power of the Wi-Fi module is less than 100mW. 2. Technical and design specifications may be changed for continuous product improvement. 3. Explore more accessories at https://www.yeedi.com.
- Page 31 Shenzhen Reecoo Electronic Co., Ltd. Building 5-6, ShangLiLang Science and Technology Park, ShangLiLang Community, NanWan Street, LongGang District, ShenZhen City, Guangdong Province, P. R. China...