Installation Instructions; Unpacking Your Dryer; Tools And Materials Required - Haier HLF11PC - 06-04 User Manual

INSTALLATION INSTRUCTIONS

Select a suitable location for the dryer on a hard even surface away from direct
sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances
etc. Any floor unevenness should be corrected with the leveling legs located on
the
bottom of the dryer.

Unpacking Your Dryer

1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the dryer accessories inside and outside.
2. Inspect and remove any remains of packaging, tape or printed
materials before using the dryer.

Tools and Materials Required

• Phillips head and flathead screwdrivers
• Channel-lock adjustable pliers
1 /2
• inch open end wrench
• Carpenter's level
• Measuring tape
• Duct tape
• Rigid or flexible metal 4 inch (10.2 cm) duct
English
16