Solid State Logic UF8 Quick Start Manual page 3

Connecting Your UF8 Hardware
1. Connect the included power supply to the DC socket on the connector panel.
2. Connect one of the included USB cables from your computer to the USB socket.
Power Supply
UF8 Connector Panel
Install SSL 360° Software
UF8 requires the SSL 360° software to
be installed on your computer in order
to function.
The SSL 360° software allows UF8 to
be configured for your DAW. It also
manages any software updates for you.
Connecting Multiple UF8s
If you are using more than one UF8, you can use the THRU port (USB 'A' type) to link
communication across multiple units. This means that only one USB port is required at
your computer.
1st UF8
C to A USB Cable
2nd UF8
C to C / C to A
USB Cable