Solid State Logic UF8 Quick Start Manual page 2

Register Today
Register your SSL UF8 for the best possible experience and to gain access to any
additional software that comes with it. Go to solidstatelogic.com/get-started and follow
the on-screen instructions. During the registration process, you'll need to input the serial
number of your UF8. This can be found on the base of your unit.
Unpacking
12 Volts, 5A Power Supply
and IEC Cable
Fitting The Stands (Optional)
UF8 can be used with or without the included screw-in stands. Holes at the top of the
base are provided to allow for different angles of elevation. You can also reverse the
stands themselves for even more angle options.
DO NOT OVER-TIGHTEN SCREWS!
Refer to User Guide
1.5m C to C USB Cable
2 x Stands
1.5m C to A USB Cable
1 x Hex Key
4 x Screws