Unpacking And Accessories Inventory - Haier HBF205E - 04-06 User Manual

UNPACkINg ANd ACCESSORIES INVENTORY

1. Remove all packing materials. This includes the foam base and all adhesive
tape holding the accessories both inside and outside.
2. Inspect and remove any remaining packaging, tape or printed materials
before turning on the beer dispenser.
Note: Allow the beer dispenser to stand in an upright position for 2 hours before
turning on the power.
Check all supplied accessories in the carton to be sure that all pieces are present
and in good condition. A checklist of accessories is listed below for your
reference. If you find any accessories that are not in good condition or are
missing, please contact our customer service department for assistance. Our
Toll-Free number is 1-877-337-3639.
2 Keg Couplers (Beer Taps), Low Profile Type
1 CO Regulator, Dual Gauge, Dual Outlet•
2
1 CO Cylinder, 5 lbs.
2
1 Cleaning Kit, Including: 32 Ounce Bottle With Cap
1 Draft Arm, 2 Faucet
Type Including:
1 CO Cylinder Ratainer
2
1 Guardrail
1 Drip Tray
4 Casters
1 Wrench
4 Large Phillips Head Screws
8 Small Phillips Head Screws
2 Retainer Fixing Screws
2 Wire Shelves
4 Support Pins
1 Keg Joining Bracket Kit
4 Ounce Powder Cleaner
Faucet / Line Cleaning Brush
Spanner Wrench (For Installing Beer Faucets to
Draft Arm)
2 Faucets
2 Red CO Lines
2
4 Hose Clamps
2 Black Knobs
1 3" Lower Gasket
(Bracket, nut and screw)
English
4