Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........22 AND ENVIRONMENT Adjusting the height of the upper General safety ........4 basket ..........23 Intended use ..........4 Height setting with empty basket .. 24 Children’s safety ........5 Collapsible upper basket wires ..
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation connected to the drain hole or sink’s Permitted water temperature: drainage. The length of this connection up to 25°C ( 60°C for products must be min. 50 cm and max. 100 cm from equipped with Aquasafe+; please the floor. A discharge hose longer than 4 refer toAquasafe+ section ) meters causes dirty washing.
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Washing performance will increase when water efficient manner. softening system is adjusted properly. Wipe away any coarse food remnants on the dishes before putting them in the product.
Page 13
Preparation Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
Adjusting the water softening system Adding salt After detecting the water hardness: Water softening system needs to be regenerated in order for the product If the hardness level of the water • operates with the same performance that you use is above 50°dH or if continuously.
Preparation Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
Preparation 2. Put suggested amount of powder, liquid/gel or tablet detergent in the reservoir. Inside the detergent dispenser there are level markings that help you use appropriate amount of powder detergent. When brimful, detergent dispenser will contain 45 cm³ of detergent. Fill detergent up to 15 cm³...
Preparation Rinse aid The best washing performance in dishwashers is obtained by The rinse aid used in using detergent, rinse aid and dishwashers is a special water softening salt individually. combination that aims to increase drying efficiency and prevent water or lime stains on the washed items.
Preparation Placing the dishes into the 4. If there are stains on tableware items after washing, level must be increased dishwasher and if there is a blue trace after wiping You can use your dishwasher in the them by hand, it must be decreased. optimum way with respect to energy This is set to position 3 as factory consumption and washing and drying...
Page 19
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket 19 / 41 EN...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) (depends on model) Cutlery basket is designed to wash your Foldable tines (A) located at the lower basket dishes such as knife, fork, spoon, etc. in an of the machine are designed for an easier efficient manner.
Preparation Collapsible lower basket Upper basket multipurpose tines service rack (depends on model) (depends on model) Foldable tines (A) located at the lower This accessory located at the upper basket basket of the machine are designed for of your machine allows you to easily wash an easier placement of large pieces such pieces such as extra long ladles and bread as pans, bowls, etc.
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2.
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards.
Preparation Collapsible upper basket Ceiling cutlery basket wires (depends on model) Ceiling cutlery basket is designed to wash (depends on model) your cutlery items such as forks, spoons You can use collapsible wires when you and etc. by placing them between the bars need a larger space for your dishes in the on the basket.
Operation of the product Keys On-Off / Program Selection knob When you select a program with the On- Off / Program Selection knob, On Warning control light is illuminated, and it is turned off when you bring the knob to Off position. Start / Pause / Cancel key Used for starting, holding or cancelling the selected program.
Operation of the product Auxiliary functions If you have used the Tablet features during the last washing Washing programmes of your dishwasher programme you used, Tablet are designed to obtain the best cleaning function will remain active in effect, considering the type of the soil, the next washing programme soiling degree and properties of the dishes you will select.
Page 30
Operation of the product Child (Key) Lock Interior Lighting (depends on the model) (Depends on the Model) Some models have interior lighting to You may prevent other persons from illuminate the interior when the door is affecting and changing the program flow opened.
Operation of the product Programming the Washing Machine softens the water as per the hardness of the mains water. The Period washing period may differ due to the Time Delay key water softening process. Moreover, You may delay the start time of the program program period may also change while up to 9 hours with the Delay key.
Operation of the product Cancelling the program Setting the Rinse aid Amount Press the Start / Pause / Cancel key for 3 seconds to cancel the program. While the Program Selection Knob is “Off”, press and hold the Half Load/ 2.
Operation of the product Level of Rinse Aid program Rinse Aid Setting Indicator Amount selection knob Applies 1 dose The washing indicator on of rinse aid. the panel illuminates. Applies 2 dose The drying indicator on the of rinse aid. panel illuminates.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 38
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 39
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 40
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 41
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the DVS050W01W and is the answer not in the manual?
Questions and answers