Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 3
CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket multipurpose / height adjustable service rack ..... 25 AND ENVIRONMENT Lower basket bottle wire ....26 General safety ........4 Upper basket rack ......26 Intended use ..........4 Upper basket multipurpose service Children’s safety ........5 rack ............
Page 4
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
Page 5
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
Page 6
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Page 7
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13.
Page 8
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Page 9
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Page 10
Installation Permitted water temperature: connected to the drain hole or sink’s up to 25°C ( 60°C for products drainage. The length of this connection equipped with Aquasafe+; please must be min. 50 cm and max. 100 cm from refer toAquasafe+ section ) the floor.
Page 11
Installation Aquasafe+ Connection must comply with national • regulations. (depends on model) Power cable plug must be within easy • The Aquasafe+ system protects against reach after installation. water leaks that may occur at the hose inlet.Water contact with the valve box of Unplug the product after the the system must be avoided to prevent washing programme is over.
Page 12
Installation To prepare the product to do the • dishes, perform first operation in the shortest programme with detergent while the machine is empty. During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. There might be a small amount of water left in the product after factory quality control...
Page 13
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 14
Installation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Page 15
Installation If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher.
Page 16
Preparation Adding salt 4. Fill the salt reservoir with salt by using the salt funnel (D). To speed up Water softening system needs to be dissolution rate of salt in water, stir it regenerated in order for the product with a spoon. operates with the same performance continuously.
Page 17
Preparation Only use in the machine Inside the detergent dispenser the detergents produced there are level markings that particularly for use with help you use appropriate dishwashers. We recommend amount of powder detergent. you not use detergents that When brimful, detergent contain chlorine and phosphate dispenser will contain 45 cm³...
Page 18
Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes are wet and/or if you notice Use powder or liquid/gel limescale spots particularly on...
Page 19
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and...
Page 20
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket 21 / 46 EN...
Page 22
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
Page 23
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it Foldable tines (A) located at the lower will be appropriate to bring the basket of the machine are designed for tines in the middle to horizontal an easier placement of large pieces such...
Page 24
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
Page 25
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
Page 26
Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread...
Page 27
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Page 28
Preparation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2.
Page 29
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine.
Page 30
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. /46 EN...
Page 31
Operation of the product 3 4 5 6 7 1. On-Off / Program Selection knob 2. Rinse aid ( ) indicator 3. Low salt ( ) warning indicator Half load indicator 5. Delay indicator Child Lock Indicator 7. On/Off Control light 8.
Page 32
Operation of the product Keys On-Off / Program Selection knob When you select a program with the On- Off / Program Selection knob, On Warning control light is illuminated, and it is turned off when you bring the knob to Off position. Start / Pause / Cancel key Used for starting, holding or cancelling the selected program.
Page 34
Operation of the product Auxiliary functions While the function is enabled, the Half Load indicator will become on in the function Washing programmes of your dishwasher selection indicator and on the display. are designed to obtain the best cleaning 4. Close the door of the machine to start effect, considering the type of the soil, the programme.
Page 35
Operation of the product Programming the Washing Tablet detergent function Period (depends on model) Allows to obtain a better drying Time Delay key performance from the multi-purpose You may delay the start time of the program detergents called as all in one detergents up to 9 hours with the Delay key.
Page 36
Operation of the product Starting of the program Monitoring of Program Press the Start / Pause / Cancel key to start You may monitor the current program step your machine after selecting the program of the program you have selected from the and additional functions.
Page 37
Operation of the product activated, the rinse aid level in the When the Program Selection memory is indicated by the program Knob is brought to “Off” monitoring LEDs for 5 seconds. position, the washing program is ended and 3. Bring the Program selection knob to the proper position for the new rinse machine becomes ready for selection of program again.
Page 38
Operation of the product End of Program Program End indicator illuminates when the washing program has ended. Turn off your machine with the On-Off / Program Selection knob. 2. Turn off the tap. 3. Remove the plug from the outlet After washing your dishes, keep them inside the machine for cooling for approximately...
Page 39
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Page 40
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Page 41
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Page 42
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 43
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 44
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 45
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 46
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the DVS05026W and is the answer not in the manual?
Questions and answers