Infinity IT-9810 Assembly Manual page 2

Step 3:
3
When raising the backrest, please pull the elastic fabric outward to
cover the whole back cover until reaching the required position as
shown in the below picture. Raise the backrest to approx. 120, until a
"CLICK" Sound is heard, to fix the backrest into position.
120
Step 5:
5
To properly install the back pad, align the zipper on the top of the
back pad with the zipper on the chair back and zip together.
Back Pad
Chair Back
Zipper
Step 6:
6
To move your chair around, apply pressure to the back of the
massage chair from behind to pivot on the Castors. Have a second
person up front to guide the Footrest until in the correct position.
Gently lower into place.
Castors
Back Cover
Latch
Elastic Fabric
Step 4:
4
Connect the chairs power cord to a grounded 110V electrical outlet
and plug it into the respective port in the chair power box, located on
back side of the base of the chair. Flip the main power switch on.
Final Check:
Power on the
Review chair for smooth operation. If things are not operating correctly,
review all assembly steps. Call Infinity support at 1-603-910-5000 if you
remote and select
need live US-based support.
a program to
start a session.
You are done; time for a Massage!
Register your product at www.infinitymassagechairs.com/
warranty to ensure it is in our system. This will simplify the
warranty process should you ever need it.
Alternatively, scan the QR code to go directly to the URL above.
SCAN CODE
Chair Power Box
Main Power Switch
Fuse
Power Cord
Main Power Switch
(close-up)
Switch
Description
ON
OFF