1 PRODUCTION INTRODUCE Thank you for choose this LUX HOTBEAM 280 products, this model is the moving head light which is the latest development of the smart, efficient products, beautiful shape, smooth R & D, combined with the advanced technology of today's stage...
01 — 3 Pin DMX In 02 — 5 Pin DMX in 03 — Power switch 04 — Power in 05 — 3 Pin DMX out 06 — 5 pin DMX out 07 — Fuse 4 SAFETY INFORMATION Safety warning message This product is only suitable for professional use and does not apply to security for other purposes.
Page 5
PREVENT FALLING WOUNDING Please don’t move the package by one person only. When Hang the fixture, please must verify that the facilities to be able to withstand the weight of the lamps at least 10 times more. Please make sure the Mounting hardware is strong enough no any damage, and insurance for the safety rope as auxiliary security fixed in other facilities will need to verify before installation.
Page 6
3. Before power on, make sure you have opened the X, Y axis lock! Attention! One product only can accept one input one output. LUX HOTBEAM 280 DMX cable include 3 contact pins: Pin 1, FOR GROUND; Pin 2 connected to the negative polarity signal;...
Page 7
And then connected from the splitter output terminal to next device. Do as above guide to connect other device, and finally coupled with terminal insertion 5 PACKAGE LUX HOTBEAM 280 packed with fly-case of two in one, or carton box. Attach follow accessory. ACCESSORY Content Quantity...
Page 8
WARNING! There is a safety hazard or damage if install similar bulb To reduce the risk of damage to light, do change the lamp before using time over 125% of lamp life. LAMP REPLACE Attention! When replace the lamp is forbidden to touch lamp with bare hand, to avoid the greasy dirt stains filament.
Page 9
5. Installed the lamp after replaced. 8 COLOR WHEEL, GOBO WHEEL STATIC GOBO ROTATE GOBO...
HOTBEAM Have 6 linear prism and 8 facet prism. 8.CONTROL PANEL Display: to display all information of fixture. Control wheel: can turn right, left and enter. 9.CONTROL PANEL MENU OPERATE Main Menu Submenu 1 Submenu 2 Function SET Function description...
Page 11
▲ "Return" Return "Xreverse" "Off" PAN SCAN Normal "Open" Pan Scan Reverse "Off" Tilt Scan normal "Feature" "XY Setup" "Yreverse" "Open" Tilt Scan Reverse "XY Speed" "Fast" Pan/Tilt fast speed "NORM" Pan/Tilt normal "Slow" Pan/Tilt slow "360 ", "360 " Pan angle 360°...
Page 12
Close other signal control "Off" the lamp "DmxLamp " Open other signal control the "Open" lamp "LampTime" 0000-9999 Lamp used time recorded ★ Password input Enter "ClearTim" "Ilum" Clear Lamp time "Wink" Lamp off "LampStat" "Ilum" Lamp on ▲...
Page 13
" Y Driven" 000-255 Tilt slave drive gear "LampPowe" "Off" Ballast earthed "total 5V", Ballast 5 V "Open" "YAngle" 000-255 Tilt angel rotation set "Return" 000-255 Return "Checksum” 01-10" Check cabrilate data ▲ “Return” Return “CHANLEVE” Chanl.,140 Show the DMX address Color...
Page 14
210-229 Empty 230-239 Lamp off by DMX 240-255 Empty Colors White 9-17 Deep red 18-26 Deep blue 27-35 Yellow 36-44 Green 45-53 Magenta 54-62 Light blue 63-71 72-80 Deep green 81-89 Amber 90-98 Blue 99-107 Orange 108-116 117-127 Blue...
0-255 Empty Strobe 0-31 Strobe close 32-63 Strobe open 64-95 Strobe from slow to fast 96-127 Strobe open 128-143 Fast to slow close fast open 144-159 Slow to fast open slow close 160-191 Strobe open 192-223 Random strobe from slow to fast...
Need help?
Do you have a question about the LUX HOTBEAM 280 and is the answer not in the manual?
Questions and answers