Way Basics DOUBLE CUBE Assembly Instructions

DOUBLE CUBE
Included
16 Pins 4 Vertical zBoards
adhesive strips on 2 edges
2 Backer Boards 2 Horizontal zBoards
thin and has no adhesive with groove on 1 side
1 Middle zBoard
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
All manuals and user guides at all-guides.com
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
1
Fit backboard into horizontal
zBoard groove.
5 Align vertical zBoard
to backboard.
Help and Comments www.waybasics.com/help
2
Carefully remove the 3M
protective layer from adhesive.
6 7
Align middle zBoard.
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
3 4
Place alignment pins Arrange vertical zBoard with
in vertical zBoards.
grooves facing backboard
as shown.
8
Repeat steps 1 - 5 for next tier.
Share and Win www.waybasics.com/share
Align horizontal zBoard and
press firmly to secure unit
together. Visit links below
for more details.
Enjoy building possibilities!