D-Link AirPlus DWL-650+ Manual page 10

Getting Started
Setting Up an Infrastructure Network
Please remember that D-Link AirPlus wireless devices are pre-configured to
connect together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Connect the modem to a wireless Broadband router (such as the
D-Link DI-713P.)
router.
If an Ethernet port is available on the router, connect a computer
that is equipped with an Ethernet Network adapter (such as the
DFE-530TX+) to the router.
Install the drivers for the wireless network adapter (such as the
D-Link AirPlus DWL-650+) into the laptop computer.
Quick Installation Guide included with the DWL-650+.
Please refer to the following sections of this manual for additional information about
setting up a network:
Networking Basics- learn how to check your IP Address; share printers and files.
Using the Configuration Utility- learn the settings you must use on each computer
in your network for successful communication.
Troubleshooting – learn how to check for the proper installation of the network
adapters' drivers and other tips for troubleshooting the network.
Fig. 4.1
See the Quick Installation Guide included with the
DWL-650+
10
See the