D-Link DWL-510 Owner's Manual page 11

Getting Started
Setting Up an Infrastructure Network
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the
following:
You will need broadband Internet access (a Cable or DSL-
subscriber line into your home or office)
Consult with your Cable or DSL provider for proper installation of the
modem.
Connect the Cable or DSL modem to your Broadband router (such
as the D-Link DI-614+.)
with the router.
Install the D-Link Air DWL-510 wireless PCI adapter into an
available PCI slot on your desktop computer
Install the drivers for the wireless network adapter (such as the
D-Link Air DWL-650) into the laptop computer.
Installation Guide included with the DWL-650.
If an Ethernet port is available on the router, connect a computer
that is equipped with an Ethernet Network adapter (such as the
DFE-530TX+) to the router.
See the Quick Installation Guide included
11
See the Quick