Table of Contents
Advertisement
Configuration Utility
Site Survey > Add
SSID (Service Set Identifier)-
Enter an SSID name (up to 32 characters in
length) The SSID is a unique name that
identifies a network. All the devices in a
network must share the same SSID name in
order to communicate.
Wireless Mode-
Select Ad-Hoc or Infrastructure mode.
Infrastructure indicates that there is an access
point in the network. An Ad-Hoc network
consists of direct peer-to-peer communication,
with no access point in the network.
Data Encryption-
Select this box to enable data encryption
Authentication Mode-
Choose one of the following modes: Open-communicates the key across the
network; Shared- allows communication only with other devices with identical WEP
settings; Auto- automatically adjusts to the Authentication mode of the network.
Key-
After inputting up to four Network keys, click on the key that you wish to use
Network Key-
Enter a key corresponding to the format you selected in the Key Format field
Key Length-
64 or 128 bit key length using ASCII or Hexadecimal key format
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for representing
English Letters as numbers from 0-127
18
Advertisement
Table of Contents
