Pausing A Wash Program - Haier ESD200 - 09-03 User Manual

ESD200-MANUAL 1/10/03
English

Pausing a Wash Program:

If you need to pause in the middle of the cycle to add or remove any items, follow
the steps below:
1) Press the "START/PAUSE" button to pause the wash process during the program.
When the wash process is paused, the selected wash program and option(s)
indicator light(s) will stay still.
2) Open the door by squeezing the door latch slowly.
Note: DO NOT open the door until the water spray action has stopped. Be
careful of moist hot air that may rise out of the dishwasher.
3) Add or remove items. Once you are finished adding or removing, simply close
the door properly.
4) Press "START/PAUSE" to resume the program. You will notice that the power
indicator display light turns on.
Understanding The Open Door Protection:
Your dishwasher will stop and beep automatically if the door is opened during the
operation. The dishwasher will not start and the beep will not shut off until the door
is closed again. Once the door is closed, the program will resume automatically.
Warning: The dishwasher door must be closed at all times during
the operation.
13
11:29 AM Page 15