Table of Contents
Advertisement
English
For Example: Adjusting the Rack to Upper Position allows you the flexibility to load
tall dishes on the lower rack.
Steps to Remove the Rack
1) Open both sides of the rail guards from the upper rack.
2) Slide the rack out.
3) Place the rack to your desired position.
4) Close both sides of the rail guards so rack will not slide out.
Loading Split Silverware Basket:
Your dishwasher has a removable split basket with two compartments that can be
separated to give you loading flexibility in order to accommodate flatware and lower
rack capacity needs. This option saves space when only half the unit is needed.
Simply remove the basket from the dishwasher to load silverware and place it back
once you finish loading.
Steps to Split the Silverware Basket
1) Put your right hand in right side of the basket and
your left hand in the left side of the basket.
2) Simply slide the basket with light force to
unlock/split by pushing it forward and pulling it
towards you until you see that both hooks come
out of the elongated holes in the middle.
Note: Do not use heavy force to split the
basket because this may cause damage to plastic hooks to break off.
3) To put both halves together again, use both hands to level the split baskets and
sliding each hook into each elongated hole on both sides. Now, slide with light
force to attach/lock by pushing it forward and pulling it towards you until both
baskets snaps in easily.
• To avoid any type of injur y, load knives and forks face down.
• Try to mix spoons, knives and forks for better cleaning and drying and to prevent
nesting.
• Do not mix stainless steel and silver items because you may
damage the silver finish on silver items.
• Do not load tall items next to the upper spray arm because it
may block the rotation.
• Do not load tin, pewter and non-dishware filters. These items
are not considered dishwasher safe.
13
Advertisement
Table of Contents
