Related Manuals for Generay RGB-11X7L
Summary of Contents for Generay RGB-11X7L
- Page 1 RGB-6X3S / RGB-8X5M / RGB-11X7L 6×3 / 8×5 / 11×7 RGB ON-CAMERA LED LIGHTS USER MANUAL...
- Page 2 INTRODUCTION hair. Use the medium RGB-8X5M as a key light for close- lighting subjects with a diffuse beam. Use the RGB-11X7L to illuminate several subjects or a larger area. All lights operate with an easy-to-use interface that will let you adjust settings and switch lighting scenes in seconds.
- Page 3 PRECAUTIONS · Please read and follow these · Clean this product with only a soft, dry instructions, and keep this manual in cloth. a safe place. · To avoid damage to this product, · Keep this product away from water be careful not to overtighten or and flammable gases or liquids.
- Page 4 LED Light (RGB-6X3S shown) Display Power switch PRODUCT OVERVIEW Mode selector Adjustment / Select rocker Brightness dial USB-C charging port 1/4-20 mounting sockets 6 × 3 / 8 × 5 / 11 × 7 RGB On-Camera LED Lights - USER MANUAL...
- Page 5 Display Mode indicator Battery indicator 5600K Color Temperature display Brightness display 6 × 3 / 8 × 5 / 11 × 7 RGB On-Camera LED Lights - USER MANUAL...
- Page 6 CONTENTS INCLUDE POWERING THE LIGHT · RGBAW LED Light The light is powered by an internal rechargeable battery. · Cold-shoe adapter Attach the included USB cable to the · USB-C to USB-A charging cable light's USB-C port to charge the battery. ·...
-
Page 7: Mounting The Light
MOUNTING THE LIGHT OVERHEATING PROTECTION Use the 1/4-20 sockets to mount the light in vertical or horizontal orientation. The light will automatically shut off to prevent overheating. Running the light in MOUNTING TO A TRIPOD, BALLHEAD, a high-temperature environment or for OR UMBRELLA BRACKET long continuous use will automatically Screw the light onto a tripod or light stand’s... - Page 8 MOUNTING TO A CAMERA 3. Screw the light onto the shoe-mount adapter until it’s aimed correctly. 1. Slide the cold-shoe adapter completely Then tighten the top locking wheel into the camera’s hot shoe, and tighten until it’s snug against the light. the adapter’s bottom locking wheel until it’s snug against the light.
-
Page 9: Operating Modes
OPERATING MODES CCT MODE Press the Mode selector to cycle through the three operating 5600K modes: CCT, HSI, and Effects. CCT Mode: Select the color temperature and brightness for your shoot. HSI (Hue, Saturation, Intensity) Mode: Select a hue from the color wheel, and adjust the saturation and brightness. -
Page 10: Hsi Mode
HSI MODE EFFECTS MODE EFFECT H:250° S: 25% Chase slow Adjustment rocker: Press the rocker Adjustment rocker: Press the rocker to to switch from hue to saturation cycle through the seven banks of effects. adjustment. A prompt indicates Turn the rocker up or down to cycle the value that can be edited. - Page 11 USB-A OUTPUT PORT LIST OF EFFECTS (RGB-8X5M and RGB-11X7L only) Use the USB-A output port and a Bank A: Flash / Fast Flash / TV Screen compatible cable to power or charge small Bank B: Candle / Flame 1 / Flame 2 devices like a tablet or smartphone.
-
Page 12: Product Specifications
RGB-11X7L: CRI 95.6, TLCI 99 at 5600 K RGB-8X5M: 7.9 × 4.8 × 0.6 in. (20 × 12.1 × 1.5 cm) RGB-11X7L: 11 × 7.1 × 0.6 in. (28 × 18 × 1.5 cm) Cooling System: Passive Weight: RGB-6X3S: 7 oz. (200 g) Dimming: 1% to 100% (Continuous) RGB-8X5M: 1.1 lb. - Page 13 RGB-6X3S: DC, built-in battery 3.7 V 4000 mAh RGB-8X5M: DC, built-in battery 3.7 V 10,000 mAh RGB-11X7L: DC, built-in battery 3.7 V 23,000 mAh 6 × 3 / 8 × 5 / 11 × 7 RGB On-Camera LED Lights - USER MANUAL...
- Page 14 ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment.
- Page 15 To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Genaray along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the RGB-11X7L and is the answer not in the manual?
Questions and answers