IronStrike COUNTRY Striker S160TGL Quick Start Manual

Striker™ Models S160TGL and S160AGL
Appliance Specifications - Freestanding Wood Stove
Product Reference Information
Cat. No. Description
S160AGL, Stove, Arch Black
H7883
Door, Nickel Nameplate
S160TGL Stove, Traditional Black
H7884
Door, Nickel Nameplate
Stove Pipe Diameter
Single Wall or Double Wall
Log Length
Firebox (1.6 cu. ft.)
Height On Legs
Height On Pedestal
Width
Depth
(door opening to rear shield)
Back to Flue Center
Maximum Output u
u
Maximum Burn Times
Efficiency
u
Heating Capacity
NOTE:
•
Dimensions shown are approximations only (+/- 1/4")
•
Diagrams, illustrations and photographs are not to scale – consult
installation instructions. Product designs, materials, dimensions,
specifications, colors and prices are subject to change or discon-
tinuance without notice.
•
Approved for residential, manufactured home, and alcove installa-
tions.
•
Optional Kits Available:
Faceplate Kits
Thermally Activated Blower Kit
Outside Air Kit
Leg Base (choice of black, gold, nickel, brushed gold or brushed
nickel)
Pedestal Base (choice of standard or with ash drawer)
Heat Shield (required with leg base)
u Square-foot heating capacities and burn times are approximations
only. Actual performance may vary depending upon home design
and insulation, ceiling heights, climate, condition and type of wood
used, appliance location, burn rate, accessories chosen, chimney
installation and how the appliance is operated.
P/N 900901-02 REV. NC 04/2019
Ship. Ship.
Weight Volume
316 lb. 18.9 cu. ft.
316 lb. 18.9 cu. ft.
6" (152 mm)
18" Max. (457mm)
18"W x 14"D
(457mm W x 356mm D)
27-1/2" (699mm)
31" (787mm)
23-1/2" (597mm)
17-3/4" (451mm)
5-3/8" (137mm)
55,600 BTUs/hr.
6–8 hrs.
69.9%
700–1,400 sq. ft.
23-1/2"
(597mm)
17-3/4"
(451mm)
6"
(152mm)
Top View
5-3/8 "
(137mm)
Legs
27-1/2"
(699mm)
Pedestal
31"
(787mm)
Left Side View
(587mm)
The Striker™ Models S160TGL and S160AGL wood stoves are
safety listed with the following agency:
• Listing Agency: PFS Corporation. Listed to UL 1482, ULC S627
C
Report No. 14-186
EPA certification test emission value 2.1 grams/hr
per 2020 cordwood standard
23-1/8"
US
Page 1 of 2