Please note that USB 2.0 hubs limit your hard drive's transfer rates to USB 2.0 speeds.
Problem: The provided USB cables are too short
Q: Can I use my hard drive with a longer cable?
A: Yes, provided it is certified according to USB standards. However, Seagate recommends using the cable
shipped with your hard drive for the best results. If you use a longer cable and experience problems with
detection, transfer rates or disconnection, use the original cable included with your hard drive.
Problem: I'm receiving file transfer error messages
Q: Did you get an "Error -50" message while copying to a FAT32 volume?
A: When copying files or folders from a computer to a FAT32 volume, certain characters in the names cannot
be copied. These characters include, but are not limited to: ? < > / \ :
Check your files and folders to ensure that these characters are not in the names.
If this is a recurring problem or you cannot find files with incompatible characters, consider reformatting the
drive to NTFS (Windows users) or HFS+ (Mac users). See
Optional Formatting and
Partitioning.
Q: Did you get an error message telling you that the drive has been disconnected when coming out of sleep
mode?
A: Ignore this message since the drive remounts on the desktop despite the pop-up. Seagate drives
conserve power by spinning down when you set your computer to sleep mode. When the computer
awakes from sleep mode, the drive may not have enough time to spin up, causing the pop-up to appear.
Windows
Problem: The hard drive icon doesn't appear in Computer
Q: Is the hard drive listed in Device Manager?
A: All drives appear in at least one place in Device Manager.
Type Device Manager in Search to launch it. Look in the Disk Drives section and, if necessary, click the Plus
(+) icon to view the full list of devices. If you're uncertain that your drive is listed, safely unplug it and then
reconnect it. The entry that changes is your Seagate hard drive.
Seagate Backup Plus Slim
4/1/19
17
Need help?
Do you have a question about the Backup Plus Slim and is the answer not in the manual?
Questions and answers