Sustainable Solutions 326620W Installation Instructions

Soft Close Detachable Round Front Bottom Fixing Seat
Model: 326620W
1
screws
hinges
PVC washers
rubber
washers
washers
bottom
nuts
3
Close the seat cover, (do not
force it closed). Straighten the
seat front and edges to align
with the edges of the bowl.
6
Remove any protective film on the
hinge covers and place them over
the hinge pin to cover the hinge.
Important Note:
Never force the seat closed as this will damage your soft close
hinges. Simply close softly and allow the seat to return to a
horizontal position.
Customer Service: help@sustainablesolutions.com | www.sustainablesolutions.com | Toll Free: (800) 460 7019
Manufactured by Sustainable Solutions International
Insert component parts into the
ceramic holes on your toilet bowl
in the order shown order. Fasten
from the bottom of the bowl. Do
not fasten the hinges too tightly;
they must stay loose to allow
proper seat alignment.
4
Once the seat is aligned well, press
the quick release buttons and lift
the seat upward to release it from
the mounting bracket.
7
Hinge
Cover
To clip the seat back onto mount-
ing bracket, place the seat over the
pins and push the seat downwards.
Vancouver, BC, Canada + Ferndale, WA, USA
Installation Instructions
Please read through all instructions
before beginning installation.
What you need:
2
Insert hinge pins into the seat.
5
Tighten both screws with a
Phillips screwdriver, until seat
is held securely.
8
To easily clean: Remove the seat
by sliding the quick release button
and pull off seat.
Cleaning Instructions:
Please use only a soft cloth and warm soapy water to clean
toilet seats. Dry the seat after washing. Use of abrasives or
chemicals can damage the finish.
EN