Sustainable Solutions 326621W Installation Instructions

Soft Close Detachable Top-fixing Toilet Seat
Model: 326621W (round) or 326611W (elongated)
2
1
Separate the parts of hinge kit.
Push anchors (#1) into seat holes
until flush with the bowl surface.
Remove the hinge covers from the
hinges. Insert screws through
hinges (#2) into the anchors.
Once the seat is aligned, lift the
seat up and push the two quick
release buttons on the inner center
of seat to remove the seat from the
mounting bracket.
Important Note:
Never force the seat closed as this will damage your soft close
hinges. Simply close softly and softly and allow the seat to
return to a horizontal position.
Customer Service: help@sustainablesolutions.com | www.sustainablesolutions.com | Toll Free: (800) 460 7019
Manufactured by Sustainable Solutions International
2
1
Leaving the screws very loosely
tightened, press the seat onto
the hinge pins. (Leaving the
screws very loose will allow you
to properly align the bowl).
Tighten the screws with a
Phillips screwdriver, until seat is
held securely.
Vancouver, BC, Canada + Ferndale, WA, USA
Installation Instructions
Please read through all instructions
before beginning installation.
What you need:
Close the seat cover, (do not
force it closed). Straighten the
seat front and edges to align
with the edges of the bowl.
Remove any protective film
from the hinge covers and
place over the hinge pin to
cover the hinge. Insert the
seat back onto the hinge pin.
Cleaning Instructions:
Please use only a soft cloth and warm soapy water to clean
toilet seats. Dry the seat after washing. Use of abrasives or
chemicals can damage the finish.
EN