Setup Menu List - Yamaha NP-S2000 Owner's Manual

SETUP MENU

Setup menu list

Available setup menus vary depending on the controller.
Menu Submenu
DHCP
IP Address
Subnet Mask
NETWORK
Configuration
Default
Gateway
DNS Server
(P)
DNS Server
(S)
MAC
Address
NETWORK
Information Status
System
MAC Address Filter
Firmware Version
(NP-S2000 Information)
Firmware Update
Friendly Name
*1: When "DHCP" is "On", you can check the values (IP address, etc.) assigned by the DHCP server.
18
En
Settings
(Bold:
default)
Select "On" to use the DHCP server to
On, Off automatically configure the network settings
of this unit or "Off" to configure manually.
Specify the IP address when "DHCP" is
"Off".
*1
Specify the subnet mask when "DHCP" is
"Off".
*1
Specify the default gateway when "DHCP" is
"Off".
*1
Specify the primary DNS server when
"DHCP" is "Off".
Specify the secondary DNS server when
"DHCP" is "Off".
The MAC address of this unit is shown. The
MAC address is also used as a vTuner ID.
The network status of this unit is shown.
The serial number of this unit is shown.
Specify the MAC addresses (up to 5) of the
network components that will be permitted
access to this unit when "MAC Address Filter
On/Off" is "On".
The firmware version of this unit is shown.
Update the firmware of this unit.
– If "Firmware Update?" appears, press ENTER to
start firmware update. Do not operate this unit
until "Update OK" appears.
– If the firmware is already the latest, "Update OK"
appears.
Specify the friendly name of this unit for
Windows 7.
Function
*1
*1
Controller
Browser
iPhone/ Remote
iPod control
touch