Newfeellight LaserCube M6 User Manual

Thank you very much for purchasing the M6 full-color animation series laser shower. For your personal safety and
better Before using this product, please read this manual carefully and strictly abide by the warnings stated in this
manual.precautions and operating instructions to avoid misuse that may cause personal safety and damage to the laser.
Please check whether the following items are present when you open the packaging box of
the laser presenter:
Laser light *1
Installation pendant/triangle *1
support bracket Battery *1
charging adapter *1
Instruction manual*1
After opening the packaging box, carefully check whether the laser performer is damaged
due to transportation, such as whether the screws are loose and whether the reflective
lens is
Whether it is broken, etc. If there is any damage caused by transportation, please do not
use this lamp and contact the dealer or manufacturer as soon as possible.
1.This lamp has a built-in battery and is a laser lamp for low-voltage 12V input. Please be sure to
connect the power adapter delivered with the lamp.
Or use the internal battery directly to power the device! ! Do not connect high voltages above 14V
directly! ! ! !
2.Please do not install the lamp directly on the surface of ordinary combustible materials.
3.The lamp should be installed in a well-ventilated place, keeping the distance from the wall more than
10 cm, and please check whether the fan hole is unobstructed.
4.Do not project the lamp directly on combustible objects. Please keep the distance between the lamp
and the illuminated object at least 12 meters.
M6 LaserCube APP laser
light User Manual
Product picture
Video Link: https://youtu.be/94p_vvth5oI
Packing list:
Unboxing instructions:
Safety warning:
www.newfeellight.com
Sheet1
Input voltage: DC12V 4A
Built-in: 3 joints 18650 rechargeable batteries
(full charge endure is about 2 hours)
Power: Max 50W
Laser power: RGB 300mw-5W
Laser wavelength: Green/ 520nm Red/ 638nm
Blue/450nm
Laser type: Imported semiconductor solid-
state laser
Laser light outlet beam size: <7*6mm
Laser beam divergence angle: <1.3mrad
Laser color: RGB
Scanning system: 15kpps, scanning angle ±20°
Modulation signal: TTL modulation or analog
modulation
Operation interface: The color display screen
can set the working mode, and the mobile
phone APP (LightElf) or WeChat Applet can be
directly edited and controlled to play (support
Apple and Android systems)
Laser pattern: Built-in 180 geometric figures +
60 groups of animation effects (mobile
APP control can only call 50 groups each)
Control mode: automatic running/mobile
phone APP control DMX control/ILDA control
(only available in M6 series)
Cooling system: fan
Installation way: hanging installation/triangle
bracket installation (optional)
Working environment: Indoor
protection level: IP20
Suitable places: home entertainment, travel,
KTV package room, small bar, family party, etc.
Technical parameters
1
phone