Extended Functionality That Can Be Configured As Needed (Advanced Setup Menu); Displaying/Setting The Advanced Setup Menu; Setting The Impedance Of Speakers (U.s.a. And Canada Models Only) - Yamaha HTR-4063 Owner's Manual

Extended functionality that can be configured as needed (Advanced Setup menu)

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
Switch this unit to the standby mode.
1
Press A while pressing and holding STRAIGHT on
2
the front panel.
Release the keys when "ADVANCED SETUP" is displayed on
the front panel display.
After approximately a few seconds, the top menu items are
displayed.
A
YPAO MIC
INFO MEMORY PRESET
BD
DVD
PHONES INPUT TONE CONTROL
SILENT CINEMA
PROGRAM l / h
J
1 : U.S.A. and Canada models only.
J
2 : Asia and General models only.
J
3 : For detailed procedures of speaker impedance settings, refer to "(U.S.A. and
Canada models only) Changing speaker impedance"
Use PROGRAM l / h to select the item to be set
3
from the following items.
In the Advanced Setup menu, you can set the following settings.
J1
SP IMP.
REMOTE ID
J2
TU
INIT
4 Press STRAIGHT repeatedly to select the value you
want to change.
STRAIGHT
Switch this unit to the standby mode, and then
5
switch it on again.
The settings become effective and the unit is powered on. If
FM AM
initialization is selected, it will be performed when the unit is
powered on again.
SCENE
TV CD RADIO
PROGRAM STRAIGHT
(☞p. 12).
Sets the impedance of speakers.
Changes the remote control ID of a receiver.
Selects one of the following FM/AM frequency steps.
Initializes various settings for this unit.
Setting the impedance of speakers
(U.S.A. and Canada models only)
SP IMP. -8 MIN
Changes the unit settings depending on the impedance of the
J3
speakers connected.
6 MIN
Select the impedance when 6Ω speakers are
connected.
8 MIN (Default)
Select the impedance when speakers above 8Ω are
connected.
SETUP
65
En