Yamaha HTR-4063 Owner's Manual page 51

■
Controlling the volume of each speaker
Level
Separately adjusts the volume of each speaker. Use
to select the desired speaker and adjust the volume with
D / E.
FL
Front speaker L
FR
Front speaker R
C
Center speaker
SL
Surround speaker L
SR Surround speaker R
SBL Surround back L
SBR
Surround back R
SB J1
Surround back
SWFR
Subwoofer
Adjustable range -10.0 dB to +10.0 dB
Default setting 0 dB (FL/FR/SWFR)
-1.0 dB (C/SL/SR/SBL/SBR/SB)
Adjustment 0.5 dB
increments
J J
1 : "SB" and "Sur.B" is displayed when using a 6.1 channel configuration only.
J
2 : Using YPAO to carry out acoustic measurement selects "PEQ" automatically.
"PEQ" does not appear if the measurement process has not been carried out at
least once.
■
Manually setting speaker distance
Distance
jCursor B / C
Adjusts the timing at which the speakers produce audio so that
jCursor
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
jCursor B / C
Use
D / E
to choose the units of length (meters or feet).
Setting distances for each speaker
jCursor B / C
Use
jCursor D / E
and then use
to your listening position.
Unit
Selects the distance unit (meters or feet).
Front L
Front speaker L
Front R
Front speaker R
Center
Center speaker
Sur. L Surround speaker L
Sur. R Surround speaker R
Sur. B L Surround back speaker L
Sur. B R
Surround back speaker R
Sur. B J1
Surround back speaker
SWFR
Subwoofer
Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)
Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)
2.60 m (8.5 ft) (Center)
2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)
Adjustment 0.10 m (0.5 ft)
increments
jCursor
to display "Unit," and then use
to display the speaker you want to configure,
to set the distance from the speaker
Setting various functions (Setup menu)
■
Adjusting sound quality with the equalizer
Equalizer
Adjusts sound quality of tone using a parametric or graphic
equalizer.
EQ Select
Select an equalizer type.
PEQ
Uses the parametric equalizer to adjust sound quality.
Selecting this setting applies the tone settings
obtained using YPAO (☞p.
GEQ (Default)
Uses the graphic equalizer to adjust sound quality. By
j
pressing ENTER, you can adjust the
characteristics of the graphic equalizer.
Off
Disables the equalizer.
SETUP
J2
23).
51
En