Cinema Dsp Parameters; Parameters Usable In Certain Sound Field Programs - Yamaha HTR-4063 Owner's Manual

CINEMA DSP parameters

<Dolby PLIIx Movie>
<Neo:6 Cinema>
Selects a surround decoder to be used with a sound field program
J1
in the MOVIE category.
Dolby PLIIx Movie
Selects the Dolby Pro Logic IIx Movie (or
(Dolby PLII Movie) Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema
Selects the Neo:6 (Cinema) decoder.
DSP Level
Change the effect level (level of the sound field effect to be added).
You can adjust the level of the sound field effect while checking the
sound effect.
Adjustable range -6 dB to 0 dB to +3 dB
Default setting 0 dB
Adjust "DSP Level" as follows:
• The effect sound is too soft.
• There are no differences between effects of the sound field
programs.
→ Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→ Reduce the effect level.
J
1 : Surround decoders cannot be changed when used with the following MOVIE
sound field programs.
• Mono Movie
• Sports
• Action Game
• Roleplaying Game
Parameters usable in certain sound field
programs
2ch Stereo only
Direct
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
Auto (Default)
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of "Bass" and
"Treble" are set to 0dB.
Off
Does not bypass the DSP circuit and tone control
circuit.
7ch Stereo only
CT Level
J2
Adjusts the center channel volume.
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjusts the volume of the surround L channel.
Adjustable range
0 to 100%
Default setting
100%
J
2 : Not displayed when speakers are set to be inactive.
SR Level
Adjusts the volume of the surround R channel.
Adjustable range
Default setting
SB Level
Adjusts the volume of the surround back channel.
Adjustable range
Default setting
Straight Enhancer/7ch Enhancer only
EFCT LVL
Adjusts the effect level of the compressed music enhancer mode.
High (Default)
Low
J2
SETUP
Setting sound field program parameters
J2
0 to 100%
100%
J2
0 to 100%
35% (7.1-channel configuration)
50% (6.1-channel configuration)
Standard effect.
Sets when the high-frequency signals of the source are
emphasized excessively.
60
En